Specifications

1, energy saving
2, environmental protection
3, automatic
4, high output

  2014 bottle water making machine

Is indebted selects and purchases the plastic which Zhangjiagang the dragon China machinery Limited company produces to squeeze out the blow molding midheaven shaper, sincerely in this acknowledgment!The Zhangjiagang dragon China machinery Limited company is the plastic squeezes out the blow molding midheaven shaper specialized Manufacturer.

Before operation use, please careful reading this instruction for use, with the aim of using correctly. Please preserve this instruction booklet well prepares the reference

 

The LHB65 blow molding machines mainly uses in producing the bottle, the pot, the pot, the barrel and the small abnormity and so on each kind of monolayer, double-decked, (double-decked) the visible fluid position line blow molding hollow piece, the biggest product volume may be 4 liters. This machine is suitable specially for PE, PP, and so on raw materials blow molding.

hydraulic parts

Name	Trader
Oil pump	TAIWAN JINSHUN
Valve	TAIWAN TAICIN
Oil pump and connection	TAIWAN
Sealed part	TAIWAN

electronic parts

Name	Trader
Micro computer control system	Japanese MITSUBISHI PLC+inductive screen
	Inductive screen: EVIEW
Tem’ control part	TAIWAN PID
Replay	OMRON company
contacting	SCHNEIDER
Air switch	MERLIN GERIN
Electric motor	Three and asynchronism motor
Power	TAIWAN MEANWELL
Transducer	SHENGZHEN

air control system

Name	Trader
Electromagnetism valve	AIRTAC

 

 

Machine Model		unit	LHB65D
Max. Product Capacity		L	1.25
Output		Pc/hr	1200-1800
Extruding System	Screw Diameter	mm	65
	Screw L/D Ratio		24
	Extruding Power	Kw	18.5
	No. of Heaters		3
	Screw Heating Power	Kw	11.1
	HDPE Plasticising Capapcity	Kg/Hr	56
Single Die Head	Max. Die-pin Diameter	mm	135
	Number of Heating Zone		2
	Heating Power of Die Head	Kw	4.4
Double Die Head	Center Distance of Die Head	mm	160
	Max. Die-pin Diameter	mm	70
	Number of Heating Zone		3
	Heating Power of Die Head	Kw	6.4
Tri-die Head	Center Distance of Die Head	mm	110
	Max. Die-pin Diameter	mm	55
	Number of Heating Zone		4
	Heating Power of Die Head	Kw	6.5
Tetra-die Head	Center Distance of Die Head	mm	85
	Max. Die-pin Diameter	mm	30
	Number of Heating Zone		5
	Heating Power of Die Head	Kw	6.5
Clamping System	Clamping Force	KN	65
	Platen Size	mm	290*360
	Platen Opening Stroke	mm	150-500
	Max. Mould Size	mm	350*360
	Mould Thickness	mm	155-300
Power	Total Power	Kw	42.5
	Average Power consumption	Kw	26
	Air Pressure	bar	0.6
	Air consumption	m3/min	0.4/0.8
	Cooling Water Pressure	bar	3
	Cooling Water Consumption	m3/Hr	3/6
Machine dimension		m	3.4*2.2*2.5
Machine Weight		T	3.7

 

 

1.1Maintenance and maintenance

(1)        New machine begins using 500 hour replacement hydraulic fluid, later every 3~6 months will replace one time regularly.

(2)        Moves to the mold guide pillar and opens the matched molds guide pillar and a row of pinion rack, each class smudges the 20# lubricating oil.

(3)        Arranges gear place each class of replenishment 20# lubricating oil one time.

(4)        Elevating mechanism's lifting screw spreads the butter frequently, the lubrication rust prevention.

(5)        The gear box begins using 500 hours to trade the oil, later every 3~6 months will replace 20# the lubricating oil, the oil level to the pinion surface.

(6)        Puts frequently except air strainer's in water and to the oil mist replenishment 20# lubricating oil.

(7)        Frequently inspection various fasteners' tight situation, prompt revision.

(8)        The machine stops using like above a half year, the non-paint part should spread the pickling oil.

In the machine operation process discovers the unusual circumstance, should immediately the shutdown check.

 

Deliver time:45days time after receive down payment.

Payment Terms:30% by TT as advanced,70% by TT before shipping.

 

Hope we could have more chances to discuss the more details about the machine you want.

 

 

 

Also you will be very welcomed to visit us at any time.