Product Details

2015 China manufaturer of new panasonic dehumidifier products

Features of 2015 China manufaturer of new panasonic dehumidifier products

1.High preformance with Japanese Nichias honeycomb rotating wheel for dehumidification

2.Ability to get the ultra low temperature(low dew point)air

3.Easy to absorb the moisture in the hot air

(Different from the other adsorbents,its adsorptive capacity can be well at 100°C).

4.Ability to absorb moisture of low temperature air

(Low temperature air , such as high pressure air , the good moisture absorbance can make the ultra low temperature air.)

5.Easy maintenance

6.Ability to wash in the water, It can be used again after wash to remove the gray scale.

Features of 2015 China manufaturer of new panasonic dehumidifier products

1.High preformance with Japanese Nichias honeycomb rotating wheel for dehumidification

2.Ability to get the ultra low temperature(low dew point)air

3.Easy to absorb the moisture in the hot air (Different from the other adsorbents,its adsorptive capacity can be well at 100°C).

4.Ability to absorb moisture of low temperature air (Low temperature air , such as high pressure air , the good moisture absorbance can make the ultra low temperature air.)

5.Easy maintenance

6.Ability to wash in the water, It can be used again after wash to remove the gray scale.

Introduce about JKE dehumidifier systems

JKE dehumidifier systems operate on the principle of adsorption of water vapor from the air. The desiccant used is silica gel, arranged in a wheel-shaped rotor having thousands of small air passages.

The desiccant wheel is housed in a cabinet that is separated into process and reactivation sections In the process section, wet air passes through the wheel, where the silica gel adsorbs the moisture. This dehumidifying process increases air temperature; And the leaving air is drier and warmer.

To drive the moisture out of the desiccant, the wheel slowly rotates into the reactivation section, where a second (heated) air stream passes through the desiccant. The moisture from the desiccant is evaporated and the moisture-laden reactivation air is exhausted outside. The wheel cycles back into the process section where the reactivated desiccant provides continuous drying of the process air.

APPLICATIONS of 2015 China manufaturer of new panasonic dehumidifier products :

It can be widely used in following situations: Yeast Sorbitol Sugar substitutes Gelatine Seafood drying Cold stores Clean rooms Food production Seed storage Pharmaceutical production, packaging, storage, testing and research Lithium battery production Electronics production Glass manufacture Shipbuilding Rubber industry Aerospace

Model No.			Unit	RO-5-D	RO-10-D	RO-20-D	RO-30-D	RO-50-D	RO-75-D
Overall performance unit	Rated air flow		m 3 /h	500	1000	2000	3000	5000	7500	10000	15000
	Dehumidification space		m 3	38	60	100	150	230	350	420	500
	Environment personnel limit		number	--	2	4	7	15	34	70	100
	refrigerating output		KW	30	46	65	82	104	167	202	315
	Excess pressure		Pa	200~	200~	200~	200~	200~	200~	200~	200~
	Excess pressure		Pa	1000	1000	1000	1000	1000	1000	1000	1000
	Noise		dB(A)	62	65	67	69	72	75	77	79
	Temperature range and accuracy			18~26± 1 degrees
	Humidity range and accuracy			0.2~1%
	Power supply			380V 50HZ Three-phase four wire

Dehumidification system	Wheel type			Silica gel molecular sieve composite wheel
	Regeneration system	Electrical heating	KW	9	21	39	61	101	149	196	286
		Steam	Kg/h	--	36	67	104	172	254	333	486
		Energy efficiency	KW	--	--	30	45	76	112	147	206
	Regeneration fan power		KW	0.18	0.37	0.75	1.1	1.5	2.2	3	5.5
Refrigeration system	Compressor	Form		Imported closed	Imported closed	Imported closed	Imported closed	Imported closed	Imported closed	Imported closed	Imported closed
		Number	Sets	2	2	2	2	2	2	2	2
		Power	KW	4.97× 2	7.91× 2	10.2× 2	14× 2	17.7× 2	22× 2	33× 2	46.4× 2
	Evaporator form			Copper tube sets of hydrophilic aluminum fins
	Refrigerant		Mode	R22
	Refrigerant		Throttle	Thermal expansion valve
Processing fan power			KW	1.5	2.2	3	4	5	7.5	13	15
Weight			Kg	1300	1800	2360	2780	3300	3960	4500	5200
Dimension			mm	4300× 1500× 2200		5000× 1700× 2320		5600× 1860× 2500		6500× 2000× 2650
Remark				1. Rated conditions: dry-bulb temperature33degrees wet- bulb temperature28 2. Steam regeneration pressure: 0.4Mpa; 3. Wheel surface wind speed: 2-4m/s; 4. Large specifications can be split in the site-site installation; production of special specifications can be customized; 5. Equipment parameters are subject to change without notice.