INOCO twin bag filter introduction

INOCO Bag filter is widely applied in worldwide industries and forming standard manufacture.bag filter can be customer made to meet different application requirement according to INOCO standard single filter or multiple bags filter.

INOCO offers you the most optimized solution with diversification and advanced filter design, precision filter bags, automatic combination.

INOCO twin bag filter materials

The bag filter materials for housing can be made of high-quality stainless steel SS304(06Cr19Ni10), SS316L (022Cr17Ni12Mo2), carbon steel (16MnR),Hastelloy(C276), the filter can refer to steel made pressure vessel  GB150 for design, manufacturing and inspection.

INOCO twin bag filter advantages:

INOCO twin bag filter is suitable for big nozzle size and large capacity filtration condition,this skid-mounted duplex bag filter is assembled by two sets of filter housing and four sets of valves ,which can realize the condition of one working one standby or two working .then short the time for replacing the filter bags.

1.Fabrication code: steel pressure vessel <GB150-2001> or ASME

2.Main materials: CS,SS 304,SS316L,lining PO or others

3.O-ring: EPDM or Viton

4.Surface treatment: sand blasted ,polish,coating painting 

5.support legs can be adjustable

6.Jacket insulation

7.Separate design for high temperature and high pressure

8.Long service time

INOCO other types of bag filter

<1>,SGD-IN Top-in bag filter 

INOCO high performance top-in filter with advanced design ensures outstanding filtration efficiency, suitable for strict application requirement with combination of outstanding filtration performance, high reliability and convenient operation.

Suitable for harsh filtration requirements.
Top-in side inlet, liquid flows from top design will make the min liquid without filtering ,it is convenient to replace filter bags, meanwhile provide great sealing .

Technical parameters>>

Refer to HG21637-91,GB150-2011 design ,manufacture ,check and accept .
Flange standard: HG GB SH HGJ JB ANSI JIS.
Connection type: thread, hoop ,flange.
Inlet& outlet: 1-1/2”.
Drain size: 1/4”.
Filter bag model: 1# 2#,3#,4#.
Filtration accuracy: 0.5um-800um.
Design pressure:1.6Mpa./Design temperature: 120℃.
Surface treatment: Surface treatment: glass ball for sand blast; polish; sanitary level polish

<2>,INOCO standard bag filter specification:

Side-in single bag filter is the very common filtration equipment.
INOCO standard side-in type filter bag including all components are all standardized, also can manufactured by line production or pressure vessel GB150.
Side-in single bag filter adopts standard lug bolt to fix, connection way is standard DN50 and DN 80 flange.
4 type normal size for filter bags: size 1,size 2,size 3 ,size 4.

<3>Hoop type bag filter:

Hoop type stainless steel bag filter is suitable for low pessure condition, which is an economic choice, this kind of filter is equipped with vent and pressure gauge connection.also size 1# and size 2# filter bag could be choosen. 

<4>.INOCO Quick open bag filter

Easy to operate, high benefit of bag filter, suitable for the application of high flow and frequent replacement of filter bag technology, it is the most suitable filter for batch production process and security filtration

Technical parameters>>

Manufacturing standards: GB150 "CS", ASME "U" seal.
Working pressure: 0.6 Mpa to 5.0 Mpa.
Design temperature: 0 ~ 80 ℃.
Applicable medium: water, chemicals, gas, etc, including flammable and explosive materials.
Pressure and temperature depends on the strength of filter materials and special condition, please consult with us

Features>>

Quick switch structure is the most simple easy and safety operating system to use, short the downtime to the shortest, boost productivity and reduce operating costs.

Three point pressure ring to ensure a good seal between filter and the filter bag, attached tools make operation very easy.

Spring auxiliary balancing mechanism makes the weight of the roof as light as nothing, only with the hand gently push and pull, can open the roof or down.
High quality O ring seal, ensure the operation is convenient, and reliable.

Side in and bottom out design ensures that the liquid can be completely emissions, at the same time using the tangent exports to choose.
Standard mode for 2 ~ 24 bag (1# and 2# bags), largest bag number is 40 bags.

<5> Multi bag filter specification

INOCO multi-bag filter housing features a cost effective, handwheel operated, davit cover. Loosen the swing bolts, turn the davit handwheel and swing the cover aside.
Standard GB150 ,”CS ” or ASME.

INOCO bag filter Advantage and Application

 INOCO Enterprice qualification and capability

Related products

1. MULTI BAG FILTER
2. CARTRIDGE FILTER
3. AIR FILTER
4. AUTOMATIC SELF CLEANING FILTER
5. BACK WASH FILTER 
6. PIPELINE FILTER
7. BASKET FILTER
8. Y STRAINER
9. DUPLEX BAG FILTER
10. FILTER BAG