Specifications

FCGW-10
10KV, 200-1000A
Outdoor-Indoor type
New type Through Wall Bushing
Function as polymer insulators

Composite Polymer Dry Wall Bushing Insulators

 

Structure:

 

• Inner Insulation material: high tension epoxy fiberglass rod
• Outter Insulation material: polymer silicone rubber

 

 

Technical Parameters:

 

Model	Rated Voltage (KV)	Rated Current (A)	Total Length(mm)	Indoor Length(mm)	Outdoor Length(mm)	Indoor Insulation Distance(mm)	Outdoor Insulation Distance(mm)	Indoor Creepage Distance (mm)	Outdoor Creepage Distance(mm)
FCGW-12/250-1000	10	250-1000	535	240	240	200	200	280	380
FCGW-40.5/600-3000	35	600-3000	1200	450	870	450	400	1015	1015
FCGW-72.5/600-3000	66	600-3000	1700	780	2250	780	700	1900	1900
FCGW-126/600-3000	110	600-3000	2870	1100	1560	1250	1150	3240	3240

 

 

Normal service conditions:

1.The ambient air temperature is no higher than +40 degree. no lower than -40 degree.

2.The altitude above sea level does not exceed 1500m

3.AC Power frequency does not exceed 100Hz

4.Maximum wind speed does not exceed 35m/s

5.The earthquake intensity does not exceed 7 degrees 

 

 

TEST REPORT:

 

Product Name:                  Polymer Wall Bushing                                        

Model:                         FCGW-35/630                        

Applicable Standards:               GB4109-1999                          

Construction Height (total length):                  1230mm                                  

Insulation Distance:   Indoor: 370mm       Outdoor: 410mm              

Creepage Distance: Indoor: 780mm           Outdoor: 1140mm    

Power Frequency Voltage Test:        95kV (Qualified)                    

Dielectric Loss Factor Test:            <0.7 (tangent)%                            

Capacitance test:                    210 pF                                       

Partial Discharge Test:                 <10 pC                                      

Appearance Test:                  Qualified                  

 

More photos:

 

 

Packing Conditon: