High Quality Cable and Wire Torsion Testing Machine
Negotiable /Set
Min.Order:1 Set
Shenzhen Autostrong Instrument Co., Ltd.
High Quality Cable and Wire Torsion Testing Machine :
1.Longterm supply
2.Used to test bending damage degree of cable and wire
3.High Quality with CE,ROHS,SGS certificates
4.According to the Standards: UL1581, IEC245-1(1980) GB5013.2-1997
Introduction:
Cable and wire torsion testing machine is designed according to the relevant standard requirements of IEC245-1(1980) and GB5013.2-1997 and the national standard of GB5023.2-1997, apply to wire and cable and inspection departments for the wire and cable and soft line to do the dynamic song torsion test.
Application:
Wire and cable torsion testing machine is used for testing rubber insulated and sheath of cables under dynamic load, after a certain times of bending, then view the damage degree.
Main function:
1.Test sample types,Two core single-phase,Three core three-phase,Four core three-phase
2.Test mode: empty load,Single-phase (two core), Three-phase (three phases, three lines/three-phase
four-wire), can choose arbitrary.
3.stop ways: A: can instruct, O, R, S, T disconnected;
B: can instruct: R/S,R/T,S/T,R/O,S/O,T/O short circuit;
C: can instruct: O,R,S,T and pulley short circuit.
Technical parameters:
Model | AUTO wire and cable torsion testing machine |
Torsion speed | 0.33m/s |
Torsion displacement | ≥1M |
Test current | 0~35A |
Test voltage | 2-core single-phase AC:0~250V/three-phase :0~450V(adjustable),50/60HZ |
Hammer | 0.5,1.0,2.0,3.0,7.0kg |
Pulley structure | two pulley structure |
Pulley diameter | φ60 φ80 φ120 φ160 φ200mm(alufer) |
Primary structure | using linear bearings and linear slide from Japan's NHK |
Package: 1piece per wooden case
Best service and Advantages from Autostrong:
If you have any questions or you need more details ,kindly cotact me by trademanager or email for further discussion,thank you for your visiting.