IEC 60068-2 Tumble Tester

1.Application:

The Tumbling Barrel Testing Machine simulates  repeated falls which may occur to such devicesas connectors  or small remote control units which are normally attached to cables during use.

 
The Tumbling Barrel Testing Equipment is the recommended  instrument to perform such  a test . barrel  is turned at  a rate of five  revolutions per  minute resulting  in ten falls  per minute. .The sample falls from a height of 500mm on to a steel plate that is 3mm thickand backed by 19mm thick hardwood. The number of falls is set by the user in accordance to the standard they are meeting. After the tumble barrel procedure,the specimen is checked visually,mechanically, and electrically as prescribed in the relevant specification.

2.Specification:

Tumbling Barrel Tester is made to the specifications set forth in major international standards. 

Tumbling Barrel Tester employs a large clear acrylic access door for easy viewing and access 

to the chamber. Models are offered with a standard barrel with a drop height of 500mm. Barrels 

of other sizes are available as well for standards such as IEC 60312 or DIN 60312 where a drop

height of 800mm (or 1000mm)is required.

3.Technical Parameters:

4.Packing&shipping

dvantages:

 AUTOSTRONG is one of leading enterprises in Hong Kong specialized in the R&D and manufacture  of testing instruments, with more than 60 researchers from foreign countries, Hong Kong and Mainland China.

AUTOSTRONG supplies standard or customized solutions and products for many tests, measurements and quality control tasks required in the field of cable, wire, socket, plug, switch, plastic and rubber testing.All of our products are complying with the requirements of many standards, such as IEC, UL, VDE, VS, JIS, GB and so on.

If you have any questions or you need more details ,kindly cotact me by trademanager or email for further discussion,thank you for your visiting.