IEC60695 IEC60335-1 IEC60884-1 IEC60695-10-2 figure 1oading device
1. Application:
IEC60695-10-2 figure 1oading device is used for testing parts of non-metallic materials for resistance to heat. It is applicable to electro technical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics.
In this test, a conditioned specimen is placed on a preheated support and subjected to a force of 20n applied through a 5 mm steel ball. The test stand, specimen and loading device are then kept in an oven at an elevated temperature for an hour. After the hour, the loading device is removed from the sample, the sample is cooled and any indentation is measured. It is important to assure that the test stand has reached a stale elevated temperature as required by the test. For this reason, the SFT ball pressure tester comes equipped with a thermocouple that inserts into the test stand so its temperature can be monitored.
2. Basic introduction:
IEC60695-10-2 figure 1oading device is the requirement ball (R2.5mm) and total test force 20N ± 0.2N ball pressure testing device, pressure level of the state and was placed in the heating chamber on the surface of the test.
In the test temperature specified by the after 60min +2 min/0min, the test quickly (<10s) immersed in 20 ° C ± 5 ° C water cooling 6min ± 2min, 3min removed from the water surface within the indentation diameter measurement test, as the indentation is more than 2mm in diameter to evaluate the test specified in the heat deformation temperature.
3.Technical parameters:
| Type | Technical parameters |
| Ball diameter | 5mm (R2.5mm). |
| Total test pressure | 20N±0.2N |
| Samples bearing | diameter50mm, length100mm Solid stainless steel cylinder |
| Production of materials | all used Stainless steel materials |
| Reference | IEC60695-10-2(2003),IEC60884-1,IEC60320-1,IEC60335-1,IEC60598-1,IEC60950-1 |
| Remark | Ball Pressure Instrument takes another a hot box (oven) supporting the use |
AUTOSTRONG is one of leading enterprises in Hong Kong specialized in the R&D and manufacture of testing instruments, with more than 60 researchers from foreign countries, Hong Kong and Mainland China.
AUTOSTRONG supplies standard or customized solutions and products for many tests, measurements and quality control tasks required in the field of cable, wire, socket, plug, switch, plastic and rubber testing.All of our products are complying with the requirements of many standards, such as IEC, UL, VDE, VS, JIS, GB and so on.
- High qualitty,Long life time and Competitive price
- Best after service:Professional R&D and technical team support,can make OEM & ODM order,and also can provide overall laboratory solutions,and good service.
- Strict quality control,more than 24hours befroe shipping and with 1year warrant
- Short leadtime and fast delivery
- With CE,ROHs,SGS and ISO certificates
- Fast response to your inquiry.
If you have any questions or you need more details ,kindly cotact me by trademanager or email for further discussion,thank you for your visiting.