GFE 20L paint pail weighing filling machine

Specifications

  paint pail filling machine

1 Working Principle

This machine adopts two heads two working semi automatic type which turn and push the arm to fix the filling position. Both mass and thin filling are finished automatically. Then capping the drum. Weighing system use precision sensor and meter which has the function self-correcting and zero automatic follow. This machine could be set as net weight filling and gross weight filling according to user's request. Filling system adopts mass and thin filling to make sure filling precision and speed. It could work with manual and automatic filling operation conveniently. It could keep work table clean matched with vacuum absorb system.

2 Technical Parameter(1 set)

2.1 Drum Volume: 10-80kg/drum

2.2 Filling precision: ≤±0.2%

2.3 Filling speed:40-80drums/hour

2.4 Air Supply: 0.45~0.8MPa

2.5 AC220V 50Hz

2.6 Air Consumption:<0.5m³/hour(1set)

2.7 Electric Consumption: <0.2KW(1set)

2.8 Environment Temperature: 10-40degree

3 Machine Supply Range:

Filling Machine                 1set

Pneumatic Capping Machine     1set

Roll Conveyor Line               1set

4 Description:

At first, forklift move the pallets on the empty pail conveyor machine. Please turn the filling mouth of the pail to meet the filling nozzle.Press start button and the filling nozzle descend. When the filling position is right( filling position close switch is not light), filling starts. Or the filling nozzle lift, then should adjust the filling nozzle and drum mouth position well, and press start press again.

5. Electric configure:

PLC(MITSUBISHI), TRANSDUCER(MITSUBISHI OR PANASONIC) ,SNESOR(SICK), Time Relay(Omron), Button and contactor(SCHNEIDER). Air Button(MERLINGERIN), Pneumatic parts(Airtac)