IEC60068-2-78 humidity and temperature lab testing equipment
USD $4,000 - $7,000 /Set
Min.Order:1 Set
Shenzhen Autostrong Instrument Co., Ltd.
IEC60068-2-78 lab testing equipment temperature humidity chamber
1. Programmable Temperature And Humidity Chamber
Design Standard: GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566
3. Programmable Temperature And Humidity Chamber Uses:
This equipment can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, LED,resist dry,resist humidity and resist cold. That can define performance of material.
4. Programmable Temperature And Humidity Chamber Character:
1.Use the high precision microcomputer touch temperature and humidity controller with high stability of platinum resistance to temperature and wind speed in the circulatory system of temperature and humidity test.
ntrol temperature&humidity well-distributed, precisely and steady.
3. Completely independent system separate for testing in high temperature, low temperature and constant temperature&humidity environment.
5. Temperature humidity chamber features:
1. Graceful appearance, circularly shaped body, surface treated with mist strips,plane handle
2. Rectangular double-paned viewing window for viewing sample under test with interior lights
3. Double-layer-insulated airtight doors, able to insulate the internal temperature effectively.
4. Water supply system that is externally connectable
5. Environmental friendly coolant R23, R404A
6. LCD display screen, capable of displaying the measured value as well as the set value and time.
7. The control unit has the functions of multiples segment program editing
8. Quick or ramp rates control of temperature and humidity.
8. Casters are used for ease of mobility, with strong positioning screws.
6. Programmable Temperature And Humidity Chamber Specifications:
Model | AUTO | ||||
Inner size W×H×D(cm) | 40×50×40 50×50×60 50×60×75 60*80*90 100×80×100 100*100*100 | ||||
Inner chamber volume(V) | 80L 150L 225L 408L 800L 1000L | ||||
Temperature and humidity Controll range | -70°C~150°C, -40°C~150°C, -20°C~150°C, 0°C~150°C, RH20%-98% | ||||
Function | Temperature and humidty fluctuation | ±0.5°C;±2.5%RH | |||
Temperature and humidity deviation | ±0.5°C-±2°C;±3%RH(>75%RH); ±5%RH(≤75%RH) | ||||
Controller resolution | ±0.3°C;±2.5%RH | ||||
Controller brand | Korea TEMI880 | ||||
Heating Time (RT-HT)°C/min | 100 | 150 | |||
40 | 50 | ||||
Cooling Time (RT-LT)°C/min | -20 | -40 | -60 | -70 | |
40 | 50 | 55 | 80 | ||
Power supply KW | 4.0 | 6.0 | 6.0 | 6.0 | |
Heating/cooling time | About 3.0/min(heat),1.0/min(cool), we can make to 3.0/min(cool). | ||||
Material | Inner material | SUS 304# steel plate | |||
Outside material | SUS 304# steel plate(surface disposing) | ||||
Thermal insulation material | Thermostability high density chlorine formic acid foam insulator material | ||||
System wind pathround-robin mode | centrifugal fan-broadband enforce circulation | ||||
Refrigeration way | Single stage compression refrigeration | ||||
Refrigerator | whole sealing piston France Taikang brand Compressor | ||||
Freezing fluid | R4O4A or USA Dupont environmental protection refrigerant(R23+R404) | ||||
Condensation way | forced air cooling or water-cooling | ||||
Heater | Nichrome heating wire heating | ||||
Humidifier | Semi-enclosed steam humidification | ||||
Water-provide way | full-automatic periodical feeding | ||||
Standard configuration | 1 Observe window(double-deck cavity toughened glass),1 50mm test hole in the left,1 PL inner chamber lamp,2clapboards, 1 bag of wet and dry bulb,3 fuses, 1 power line. | ||||
Safety device | Non- fuse-switch(compressor overload, refrigerant high low voltage,over-humidity and temperature protection,Protection switch,fuse stoppage warning system | ||||
Power | 1φ 220V AC±10% 50/60Hz 3φ 380V AC±10% 50/60Hz |
7.Safety Devices:Leakage current, overload, compressor overload, over temperature, ultra-wet, dry, humidification temperature protection.
Temperature And Humidity Chamber
8.Pictures Show
By testing your product with our temperature humidity chamber, you can:
Environmental Test Chambers are mainly and widely used for various types of testing such as prototype evaluation, research & development testing, production quality control testing, accelerated stress testing, reliability testing, failure analysis, and any other application where environmental simulation is needed.
Our services
1. High quality products.
2. We will take photos of your order before shipment.
3. Engineering team is professional and will provide you with good after-sales service.
4. Quality assurance is 1 year.
The advantage of our company
1. Engineering team is professional and will provide you with good after-sales service.
2. Many years of experience in foreign export.
3. Delivery time is fast, and quick respond.
4. We will send a picture of the packaging and product before shipment.
Management philosophy
1) Customers are god. We will do our best to satisfy you.
2) We will protect our reputation.
3) The quality is the most important thing.
4) We will bear a strong sense of responsibility.
Looking forward to hearing your inquiry!~Thank you!