magnetic damper torque controller 

Schematic diagram:

Suitable for enameled wire, metal wire, weaving wire winding, such as homework.
Magnetic damper is also known as torque controller is a kind of superior performance of the automatic control components, with its unique character brings tension and torque control industry especially papermaking, wire and cable winding, metal foil, strip, film and other processing equipment and textile machinery and other advanced control mode.
The torque control
After the predetermined value transfer scale needle to torque, lock set screw.
The installation
Don't use unnecessary force and avoid collision
Through both sides of the three screw hole fastening installed, make sure will not make the screw loose by vibration


operation
Within the disc and magnets are easily broken parts, don't throw on the ground or vibration
The product structure to maintain a stable narrow spacing, impose unnecessary if the external force, will likely not work properly
Pay attention to
Disc received extremely strong magnetic force, so when the torque setting from high torque to a very low torque, residual magnetic force will cause uneven rotation of the disc.In order to avoid this kind of phenomenon, when torque adjustment from high to low torque, slowly turn the output shaft.
Features: 1) the magnetic damper
A. magnetic damping tensor and permanent magnet tension controller, based on magnetic medium transmission device for A constant torque.Friction damping plates do not contact with magnet, non-slip, so the service life is long, tension control is extremely stable.B. turn the parts are all precisely processed by the light solid material, moment of inertia of tiny.C. tension with elasticity of output roller made of soft rubber line does not hurt.D. metal parts are antirust processing, excellent corrosion resistance.E. installation simple structure, convenient adjustment, tension size design compact structure, small size, can be in various position stable work.
2) the magnetic damper adjustment method and the matters needing attention
1. Dispatch scale value used to 3 above, if the tension is big, had better choose a smaller size specifications of the damper.
2. If the scale value 3 the following use, could be generating force ripple.Please follow the way to eliminate consequent 3 stated pulsation.
3. Loosen the fastening screws, transfer scale to 10, the rotating spindle at the same time slowly turned its scale to 0, then transferred to the required scale value. Tighten lock screw.
4. If the tension fluctuation phenomena appeared in the process of use, please repeat the adjustment method of 3 steps to get satisfactory tension.
5. Damper using magnet to produce medium of magnetic field, the material brittleness is bigger, so please do not open it in use and the impact, so as not to damage parts.