Product Details

Introduction:

The distilled water device can be mounted on the wall or floor-stand at the ground, designed to minimize the economic cost to get efficient high quality distilled water automatically. Pure distilled water is indispensable for the analysis use to the hospitals, health centers, research institutes and laboratories, the apparatusis specifically designed for the distilled water self-prepared for the above units. The distilled water is totally meet the requirement of < GB / T6682 - 2008 water for analytical laboratory use - Specification and test methods> specified in the national standard CLASS III water standard.

Workflow

Raw water flow into the bottom of the condensing tube along the loop, eventually entering the evaporation pan, the water level of which is measured by the overflow dam. The steam in the condensing tube will drop down and pre-heat the raw water raising in the column, which is more economical, and also can dissolve the steam into the water. The exhausting steam will be released from the entrance, and the steam generates from vaporized pan is flowed through the guide plate then reach the condensing tube, finally jthe distilled water obtained. The evaporation pan, the condenser pipe and the guide plate are fully stainless steel. The out lid is made of heat-resistant borosilicate glass.

Characteristics

Name: GZ-5L/H 10L/H 20L/H VERTICAL OR WALL MOUNTED ELECTRICAL DISTILLER
Brand: chincan
Availability: InStock

1. The apparatus is automatically controlled, without supervision.

2. Nice appearance, and can be viewed the inside of the evaporation container from the upper glass frame.

3. Water and electric saving type, 15% water can be saved compared to the old type, 20% electric can be saved but the output of water can be guaranteed.

4. Automatically cut the power if the over current happened.

5. Low water protection, power will be cut of if the water level beneath the heating tubes.

6. Autility patent has been obtained

type	GZ -5L/H	GZ -10L/H	GZ -20L/H
Output	5 L/h	10L/h	20L/h
Power supply	AC220V 50Hz	AC380V 50Hz	AC380V 50Hz
Consumption	3.5KW	6KW	12 KW
N.W	8 kg	11 kg	16 kg
Weight with full water	11 kg	16 kg	25 kg
PH. value	5~7	5~7	5~7

Certifications

Warranty

Normally all CHINCAN products are supplied with a warranty of 12 Months from the date of shipment. This warranty is entirely dependent on the following conditions:

1.The following circumstance don't belong to the warranty policy which is Man-made damages caused by improper operations.

2.The instruments must be operated in accordance with our operating guidelines; serviced and maintained on a reg-ular basis in accordance with the terms specified in the relevant user manual.

3. Only approved spare parts should be used in the instruments which bought from CHINCAN and these should be changed on a regular basis as specified in the relevant user manual. Details of the approved spare parts and accessories for eaCh instrument are shown in the user manual or alternatively this information can be obtained from CHINCAN.

Company Information

Established in 2004, Hangzhou Chincan Trading Co., Ltd. is a foreign trading company authorized by Chinese State Department of Foreign Economy & Trade and General Administration of Chinese Customs, which located in Hangzhou city, Zhejiang province, China.

We are a specialist company committed to exporting laboratory instruments, educational apparatus, medical & hospital equipments. With its superior performance, Chincan instruments are sold well throughout the Americas, Asia Pacific, the Middle East, Africa and Europe. With our excellent service, Chincan Trading has won a good reputation from the market.

Cooperative factories which qualified by Chincan come from many provinces and cities across China. All of them need to be ISO certified, Some products have CE.

Our customers spread all over the world, most products are very popular in Asia Pacific, Africa, Europe and South America,such as microscopes, autoclaves, shakers, incubators, baths, pH meters, spectrophotometers, pure water systems, balances, pipettes, centrifuges, viscometers, hardness testers, biological safety cabinets, etc.

We are doing our best to meet various needs of clients from different countries.

Our company website:

FAQ

Q: What after-sales service can be provided by CHINCAN ?
A: The after-sales service of CHINCAN is divided into two parts: technical support and maintenance.

Q: What about the technical support and maintenence?
A: Sometimes users will get some problems when they operate the instruments which are unfamiliar or first time use, users can send us emails or call us about detailed information. We will provide users solution or operation video.For so many years’ experience, our instruments works well during warranty period. If there any parts are broken during warranty period, we would like to provide spare parts for free.

Q: How to solve the disputes between CHINCAN and customers during the after-sales maintenance?
A: We will be customer oriented,and make concessions in some principles , we will properly handle the disputes to maximize customer's satisfaction.

Our Services

OEM
We have the experience, capability and R&D resources to offer ovens and incubators OEM service.
Once customer provides us with concept information and detailed specifications, we will notify them of the total cost for design, prototyping, and estimated cost per unit before the project begins.

OEM Service
1. Free logo design, MOQ request accordingly.
2. Outside color, temperature range, shelf adding, etc. Customization is available.
3. Optionals accessories: inert gases inlet valve, vacuum pump, etc.

Packaging & Shipping