APPLICATION

AAC conductor is also known as aluminum stranded conductor. It is manufactured from electrolytically refined aluminum, with a minimum purity of 99.7%.

STANDARDS

Basic design to BS 215-1 / BS EN 50182 / IEC 61089 / ASTM B 231/B 231M / DIN 48201
-5 standards

CABLE CONSTRUCTION

Concentric lay stranded Aluminum Conductor ( AAC) is made up of one or more strands
of hard drawn 1350 aluminum alloy. These conductors are used in low, medium and high voltage overhead lines. AAC has seen extensive use in urban areas where spans are usually short but high conductivity us required. The excellent corrosion resistance of aluminum has made AAC a conductor of choice in coastal areas. Because of its relatively poor strength to weight ratio, AAC had limited use in transmission lines and rural distribution because of long spans utilized. All aluminum conductors are made up of one or more strands of aluminum wire dep.

ELECTRICAL PROPERTIES

SERVICE CONDITIONS

Construction Parameters

BS 215 Part 1

Note: *The values of current rating mentioned in above Table are based on wind velocity of 0.6 meter/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.

BS EN 50182

IEC 61089

ASTM B 231/B 231M

* The items marked with “*” are not in our current product range and the details are for information only.
(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.

DIN 48201 Part 5

 * The items marked with “*” are not in our current product range and the details are for information only.
(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.

Technical Data

Shandong Yanggu Cable Group’s predecessor is Shandong Yanggu Cable Factory, was founded in 1986. Has plant area more than 700,000 square meters, has more than 2,000 employees, has the Shandong Pacific Fiber Cable Co., Ltd., Nexans (Yanggu) New Rihui Limited, Yanggu Mingschin Copper Co., Ltd., Shandong Pacific Oaks Cable Ltd. and other holding companies.

Has formed the power cable, control cable, mine cable, fiber optic cable, photoelectric composite cables, aluminum alloy cable, pv cable, irradiation cable, Marine cable, locomotive cables, special cables and so on more than 20 series more than 5000 kinds of specifications of products, the company annual comprehensive production capacity of more than Us $1.6 billion.

anggu Cable Group is the first company took the passed the ISO9001 international quality system certification, ISO14001 environmental management system certification and OHSAS18001 occupational health system certification in the same industry.

Company has main production equipment 860 (sets) and testing equipment 314 (Taiwan) sets. the company annual comprehensive production capacity of more than Us $1.6 billion.

Set up a national wire and cable testing center and is involved in the process of making the 12 national and industry standards

CE CERTIFICATE

ISO9001

ISO14001

OHSAS18001