Deep Cleaning Steps of Corneal Reshaping Lens Designed by MCT Technology

1.Take small accessories out of the box, rinse them by running water, drop a drop of cleaning solution and rub the accessories, and rinse by water again, dry the accessories and put them in a clean plastic box.

2. Pour water which is about 70 ° to 100 ° into the plastic box, soak the small accessories, and then dry them. Put the accessories into instruments successively.

3.Clean the lens by silicone sponge pad in Lens Cleaning Case. Rinse with clean water or cold water (boiling pure water) to remove the dirt on the lens. Put the lens into the instrument (the lens surface is up). Drop 3-4 care solution on the lens surface, and close the cover of instrument, push the switch button to the left.

4.After two-minutes cleaning, open the instrument cover, clips lenses up with tweezers, and then drop some cleaning solution to wash the lens. Put the washed lens into the empty case. Remove the small accessories from the instrument, dry them and soak them in the water which is about 70 ° to 100 ° for a while. Dry them again and put them into the instrument. Put the lens into the cleaning accessories again, drop 3-4 drops cleaning solution, close the cover and begin the secondary cleaning.

5.After the secondary 2-minutes cleaning,process the lens according to the 4th step, and then pour the cleaning Boston Simplus Multi-action Solution into the case.

6. Rinse the small accessories with clear water, and keep them for the next use.

Note: every time before cleaning the lens, the small accessories must be cleaning by cleaning solution. (Step 2)

7. General lens care: clean the lens by cleaning pad, disinfect and store the lens by Lens Cleaning Case everyday. Use Cleaning Instrument to deeply clean the lens 1 to 2 times every week. This not only can keep the lens clean for a long time, but also can prolong its service life.