Product Details

Copper Clad Laminate/CCL copper clad lamianted sheet/FR4, XPC, CEM1, FR1

1. FR-4 Copper clad laminate/CCL consist of E-glass fabric, impregnated with epoxy resin and clad with electrolytic foil. It has excellent electric, mechanical and flamer retardant properties and is widely used for PWB with printed circuit on one or both side in microwave ovens, computers, communication apparatus as well as other high grade electronic instruments.

NO.	Index name	Test Method GB/T 4722-92 in the chapter	Index CEPGC-32F (FR-4)
1	Pull-off Strength, N is not less than	15	60
2	Peel strength, N / mm is not less than After welding of 20s ≥ 35μm copper foil 18μm copper foil After drying at 125 °C≥ 35μm copper foil 18μm copper foil After exposuring to1.1.1-trichloroethane solvents ≥ 35μm copper foil After handling the stimulated electroplating conditions ≥ 35μm copper plating 18μm copper foil At 125 °C ≥ 35μm copper 18μm copper foil At 260 °C ≥ 35μm copper 18μm copper foil	7	10000 50000 1000
3	after Thermal Shock of 10s, the blistering test is	17	Non-hierarchical, non-foaming
4	Weldability, s Wetting test 35μm copper foil Thickness 0.5mm to 1.6mm More than 1.6mm to 6.4mm thickness 70μm copper foil Semi-wetting test	20	2 3 3+10 5
5	Bending strength, MPa not less than Thickness 1.0mm and over	25	300
6	Flammability, Class Vertical Method	25	FV0
7	Water absorption, mg Thickness 0.5mm 0.8mm 1.0mm 1.2mm 1.5mm 1.6mm 2.0mm	27	20 20 20 20 20 20 21

The crooked &#118alue of Foil Clad Laminate is tested accoring to GB/T4722 in Chapter 14. When coverting Foil Clad Laminate into L= 1000mm, the &#118alue of d and d’ can not exceed the rules of the following table.

Nominal thickness	crooked &#118alue d			Distortion d ’
	Single-sided Foil Clad Laminate		Double-sided Foil Clad Laminate	Single-sided Foil Clad Laminate	Double-sided Foil Clad Laminate
	≤35μm	>35μm	≤70μm	≤70μ m
0.8 to 1.2 upper 1.2 to 1.6 upper 1.6 to 2.2 upper 3.2 to 6.4	27 18 9 9	37 30 16 16	12 12 8 8	24 20 12 12	12 12 8 8