All Aluminum Alloy Conductor (AAAC) Cables

APPLICATION

AAAC is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical teatures exist.

STANDARDS

Basic design to BS 3242 / BS EN 50182 / IEC 61089 / ASTM B 399/B 399M / DIN 48201
-6 standards

CABLE CONSTRUCTION

AAAC cable bvconsists of aluminum alloy wires. The aluminum alloy wires are concentrically stranded.
This section deals with heat-treatable magnesium silicon type aluminium alloys to the applicable International Standard, the electrical and mechanical properties of which all fall within the values suggested by relevant standard. Conductors to all other recognized specifications can also be supplied. The alloys referred to have higher strength but lower conductivity than pure aluminium. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than
the later, their use becomes particularly favourable when ice and wind loadings are low.

ELECTRICAL PROPERTIES

SERVICE CONDITIONS

Construction Parameters

BS 3242

(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C. 
BS EN 50182

(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.
IEC 60189

(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.
ASTM B 399/B 399M

(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.
DIN 48201 Part 6

 * The items marked with “*” are not in our current product range and the details are for information only.
(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.

Technical Data

Shandong Yanggu Cable Group’s predecessor is Shandong Yanggu Cable Factory, was founded in 1986. Has plant area more than 700,000 square meters, has more than 2,000 employees, has the Shandong Pacific Fiber Cable Co., Ltd., Nexans (Yanggu) New Rihui Limited, Yanggu Mingschin Copper Co., Ltd., Shandong Pacific Oaks Cable Ltd. and other holding companies.

Has formed the power cable, control cable, mine cable, fiber optic cable, photoelectric composite cables, aluminum alloy cable, pv cable, irradiation cable, Marine cable, locomotive cables, special cables and so on more than 20 series more than 5000 kinds of specifications of products, the company annual comprehensive production capacity of more than Us $1.6 billion.

anggu Cable Group is the first company took the passed the ISO9001 international quality system certification, ISO14001 environmental management system certification and OHSAS18001 occupational health system certification in the same industry.

Company has main production equipment 860 (sets) and testing equipment 314 (Taiwan) sets. Which was imported successively from South Korea, Japan, the United States, Switzerland, Finland, Germany and other seven countries have the international leading level of the ultrahigh voltage and high voltage cross-linking cables, rubber sets of cables, fiber optic cable production line and testing equipment: Nokia of Finland, Troost of Germany is vertical and catenary cross-linking production line, three-layer co-extruded rubber cable PLCV120 UK production line, production line CCV90 Germany, Finland NEXTROM, Austria MS company, ROSSENDAHL company's full range of cable production line, built to high 128.9 meters of vertical cross-linking pylons, Largest one in Asia is 500 kv power cables resonance test area, ensure the quality of the products reached the domestic leading level. Has formed the power cable, control cable, mine cable, fiber optic cable, photoelectric composite cables, aluminum alloy cable, pv cable, irradiation cable, Marine cable, locomotive cables, special cables and so on more than 20 series more than 5000 kinds of specifications of products, the company annual comprehensive production capacity of more than Us $1.6 billion.

Set up a national wire and cable testing center and is involved in the process of making the 12 national and industry standards

CE CERTIFICATE

ISO9001

ISO14001

OHSAS18001