Product Details

Specifications

PA6,50% gf,Reinforced,for water meter
1.manufacturer
2.stable good quality
3.ISO,UL,SGS,ROHS,etc

Reinforced PA6,30% GF,vehicle fan stents, shell of electric tools

Main Components:

1.PA6+FR

Features:

Nano modified polyamide (PA) -n series direct drinking water meter is special material, is the enterprise independent research and development production of high-performance modified engineering plastics and its physical properties, chemical properties, weather resistance can be detected by the legal departments of the state meet the national standards, fully meet the requirements of manufacturing water meter, has the following features:
1. Health non-toxic, no pollution.
2. Great toughness, high strength, high modulus.
3. The impact resistance is strong, has good low temperature resistance.
4. Good heat resistance, thermal deformation temperature is high.
5. Good dimensional stability, small linear expansion coefficient, bibulous rate is low.
6. Excellent anti-aging performance, has more than 20 years' use.

Property List:

The bending modulus of the bending strength: 240 MPa, 10500 MPa
Tensile strength: 160 MPa elastic modulus: 5775 MPa elongation at break: 5.46%
Bibulous rate (23 °C) : 0.66% linear expansion coefficient of: 2.12 x 10-5 °C - 1
Surface hardness (shaw D) : 79 - degree density: 1396 kg/m3
Thermal deformation temperature (0.45 MPa) : 183 °C
Beam notched impact strength (v-notch, 23 °C) : 21 kJ/m2
Beam notched impact at low temperature (v-notch, and 30 °C) : 12 kJ/m2
In temperature 100 °C, humidity under the condition of 70%, after 7 days (168 h) after aging treatment, its performance is as follows:
The impact strength after aging: 19 kJ/m2 (performance fell by 10.5%)
After aging tensile strength: 155 MPa (performance fell by 3.1%)
Aging after bending strength: 205 MPa (performance fell by 14.6%)
After aging performance can fully meet the requirements of manufacturing water meter mechanics.

Product picture:

Product applications: electrical terminals, socket and other electrical components.

Package:

25kg/bag, in complex paper bag or poly woven bag,customized match to price.

Remark:

To the best of our knowledge, the information contained herein is accurate. However, all materials may present

unknown hazards and should be used with caution. Final determination of the suitability of any material is the

sole responsibility of the user.

QC Flow Chart:(production percent of pass:>99%)

Detection Devices:

Enterprise Certification:

We have passed ISO9001:2008 quality management system certification,ISO14001:2004 Environmental Management System certification,the EU RoHS certification,the United States AQA certification and American Yellow Carl UL certification and the world through standard SGS testing and certification.

Enterprise Honors:

Factory Photos:

Office Building

Workshop and Warehouse

Why Choose Us:

1,Since 1933,more than 20 years of experience in the field of plastic modification

2.Registered Capital: US$10.8 Million

3.Employee: 300

4.Covered Area: over 60 000 m²

5.Annual Capacity: over 20 000 Tons

6.Pass:ISO9001:2008 ISO14001:2004,UL,SGS

7.Products comply with RoHS,REACH,PAHs,etc