Specifications
1. 8 SAT inputs;1 Terr input;8 outputs Satellite multiswitch
2. Low loss and high isolation
3. Adaptor fitted DC:18V1.8A
Features:
- Suitable for multi-satellite and multi-user system
- 8 satellite inputs, 1 terrestrial input
- 8 subscriber outputs, cascade and finite multiswitches
- Low cascading loss and high isolation
- Feed from Quattro-LNB or Quad-LNB thru 22 KHz generator
- SAT IF selected by 13/18V, 22 KHz and DiSEqC2.0 commands
- Professional design, exquisite appearance and convenient installation
Specifications:
Model | HMS 98 / HMS 998(Cascade) |
Inputs | SAT | 8 |
Terr | 1 |
Subscriber Outputs | 8 |
Frequency (MHz) | SAT | 950-2150 |
Terr | 47-862 |
Trunk Loss (dB) (Cascade) | SAT | 9 |
Terr | 6 |
Tap Loss (dB) | SAT | 0dB±2 |
Terr | 3dB±2 |
Return Loss (dB) | SAT | 12 |
Terr | 10 |
Isolation (dB) | LNB-LNB | 35 |
Terr-SAT | 30 |
SAT-Terr | 35 |
H/V | 30 |
Switching Voltage | 15±1V |
Switching Commands | DiSEqC 2.0 |
Power Supply | DC:18V2.0A |
Welcome to visit our factory in Zhuhai and Samples will be sent by express upon request.
You may also like:
Installing a multiswitch
A multiswitch allows you to feed many satellite TV receivers in various rooms with satellite TV signals from a QUATTRO LNB on your dish. In addition, if you wish, you can also feed aerial signals from a UHF TV aerial or, with the addition of a V24-310 triplexer, any or all of UHF TV (analogue and/or digital), FM radio or DAB.
DISH SIZE
In general, it will be found beneficial to use "the next size larger than normal", for two reasons:
- A multiswitch has losses and, although some incorporate signal amplifiers, providing a better signal to begin with will reduce the percentage of "noise" added by the amplifier.
- Most installations that use a multiswitch will use longer cable runs than a "normal" house, resulting in more signal loss.
Installation instruction