Product Details

YADA 304 stainless steel sheet

Product Description

Chemical Composition and Physical Properties :

Table 1. Typical chemical composition for 304 stainless steel sheet

%	304
C	0-0.07
Mn	0-2.0
Si	0-1
P	0-0.05
S	0-0.02
Cr	17.5-19.5
Ni	8-10.5
Fe	Balance

T able 2. Typical mechanical properties for 304 stainless steel sheet

Tensile strength (Mpa), 520
Yield strength (Mpa), 205-210
Elongation is 40% (%)
Hardness HB187 HRB90 HV200
7.93 g/cm3 density of 304 stainless steel austenitic stainless steel is generally use this value 304 chromium content (%) of 17.00-19.00, nickel content. %), 8.00 to 10.00, 304 is equivalent to our country's 0 cr19ni9 (0 cr18ni9) stainless steel
304 stainless steel is a kind of common stainless steel materials, corrosion prevention is better than 200 series stainless steel materials. Resistance to high temperature also is better.

Specifications:

Commodity	Factory Supply 304 Stainless Steel Sheet
Width	1000mm/1219mm/1240mm/1500mm/2000mm or as customer’s requirements.
Thickness	Cold rolled:0.3-3.0mm Hot rolled:3mm-150mm
Length	1000mm to 6000mm or as customer's request
Surface	No.1,2b,8k,2d,Ba,No.4,No.6,No.8, etc.
Material	304

Grade	300series
Standards	AISI ASTM JIS SUS and GB
Certifications	ISO 9001and SGS
Applications	Kitchenware, utensils, tableware, household appliances, construction decoration and daily products
Packing	1. with wooden pallets, or film covered, in the containers. 2. Export standard package or as the customers' demands. 3. seaworthy wooden cases. 4. with or without edge protector,steel hoop and seals. 5.export -ted standard package or as customers signal requirement.
Place of origin	Shanxi China (mainland)
Payment terms	1.30%T/T in advance ,the balance against the B/L copy 2. 30%T/T in advance,the balance be paid by L/C at sight
Delivery time	7-15days

Applications:

Oil and gas: Platform accommodation, cable trays, sub-sea pipelines.

Medical : Surgical instruments, surgical implants, food processing.

Food and Drink: Catering equipment, brewing, distilling, food processing.

General : Springs, fasteners(bolts, nuts and washers) wire.

Water : Water and sewage treatment, water tubing, hot water tanks.

Surface Treatment:

Finish	Characteristics
No. 1	Finished by hot-rolling, annealing and pickling, characterized by white pickled surface
2B	Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface
No. 4	Polishing with No. 150 to No.180 mesh abrasivesThe most popular finishes

Contact information