Features of YAG laser cutting machine
Scientific cantilever structure and stable optical path.
The laser cutting machine put the independent laser tube into the cantilever structure. The cantilever structure drives the laser tube moving on the Y-axis. The movable parts of the machine drive the cantilever moving on the X-axis. The computer software controls the machine moving towards different directions. The schematic diagram as follows:
1. The body of the laser cutter is high-strength aluminum alloy plate, which are light weight, high precision and resistance to deformation.
2. The laser parts including mechanical following cutting head and optical system. The optical system adopts German technology, which integrates the mechanical following optical path and laser optical path as an integral and independent part. The key technology of the cantilever moving solid laser cutting machine is the stable of the optical system.. But we have solved it successfully.
It's very easy and safe to put the metal material on the nail worktable.
This solid laser cutting machine adopts cantilever structure, so when adjusting the laser path or exchange the lights, the operator just need to move the cantilever structure to the edge of the worktable, extend the cantilever.
It's very easy and safe to put the metal material on the nail worktable
The worktable of this solid laser cutting machine is an independent unit, it's near the floor, so it's easy to put metal sheet onto the worktable. When putting metal sheet onto the worktable or take metal sheet out of the worktable, the laser head could be moved to the original point of the worktable to avoid strike by the material.
New and unique laser cutting head
This solid laser cutting machine adopts mechanical following cutting head. The locking ring of the laser head nozzle makes a good surface contact with the metal sheet , the head moves up and down according to different material heights, so the focal length always keep consistent during the work. This head moving smoothly and stability. What is more, there is not obvious spark splash when the laser working .The traditional cutting head is inductive ,with phenomenon of sensitivity reducing or disoperation, caused by the changing of air medium or electromagnetic field interference ,thus cutting quality decline and cutting head crash damage .This new cutting head greatly improved these aspects. This mechanical servo cutting head has applied for the national patent.
For mechanical transmission pumping handling is easy and reliable
The transmission system is comprehensive lubrication with manual precision of joystick pumping.
Multi-function of cutting
This laser cutter can cut metal sheet up to 2.5m*tal pipe and finished rack chassis can be processed too when remove nail worktable.(attached picture).
Easy transportation and installation
Cantilever body and nail bed can be separate from laser cutter packing during transportation. These two parts will be installed After positioning of the base and the cabinet components.
....