Jumper Fetal Monitor JPD-300P( with patent technology fetal stimulator fuction)
Features:
1. Lightweight,space saving,easy operations,can be laid on or mounted
2. Interface of parameter of FHR,TOCO,Fetal movement(standard parameters),etc
3. Support pause and playback
4. TFT lcd display 7'',10.1'',12.1'' choose
5.Built-in long-life,HD themal parinter
6. Probe:high sentivity/waterproof/built-in FAS
7.Automatic grading function
8. Data storage 36 hours
9. DC(16.8v lithium battery) and AC(100V-240V,520Hz/60Hz)
10. Options: Twins monitor interface,Twins FHR measurement,FAS(fetal acoustic stimulator)
Specifications:
Fetal Heart Rate:Transducer: Multi-crystals, pulsed doppler , high sensitively Strength: ,<5mW/cm2
Working frequency: 1.0MHz
Signal processing: special DSP system and modern recognization.
Measurement range: 50~210 bpm
Alarm Range:High limit: 160,170,180,190 bpm
Low limit: 90,100,110,120 bpm
Maximum audio output power : 1.5 Watt
Toco:Measurement range: 0~100 units
Maternal SpO2 measure: Measure scope : 70%~99%. Measure accuracy: ±3%
Pregnant HR Measure: Measure scope: 30bpm~240bpm
Measure accuracy: ±2 bpm
NIBP measure:
a) NIBP-SYS (6.7~32.0Kpa)(50~240mmHg)
b) NIBP-DIA (3.4~26.6Kpa)(25~200mmHg)
c) NIBP-MEAN(2.0~24.0ka(15~180mmHg)
NIBP Accuracy: ±1.1kPa(±8mmHg)or ±5% of the results, take the bigger one.
Maximum Mean error : ±5mmHg
Maximum Standard deviation 8mmHg
Pulse Rate Accuracy: Maximum Mean error : ±2bpm
Measure accuracy: ±2 bpm or ±5% of the results, take the bigger one.
Measure mode: Manual
Power Consumption: < 20W
Dimension: 295W×240D×73H(mm)/Net weight:1.75kg
Working Environment:Temperature: 5~40°C. Relative humidity: 10~80%
Transducer Acoustic Output:Under the requirements laid down in IEC 1157, 1992, the peak negative acoustic pressure
does not exceed 1Mpa. The output beam intensity does not exceed 20mW/cm2,and the spatial-peak temporal-average intensity does not exceed 100mW/cm2HI.