Specifications
HDPE geomembrane:1.Material:HDPE
2.Width:1-7M,Length:50-200M
3.Certificate:ISO
4.Thickness:0.25MM-3MM
Specifications
1.Material:HDPE
2.Width:1-7M,Length:50-200M
3.Certificate:ISO
4.Thickness: 0.25MM-3MM
HDPE geomembrane 0.5mm thicknessFeatures:
1.All physical factors such as anti-draw, anti-tear, and anti-stab meet the requirement of water works, chemicals, tunnels,
and transportation project in most conditions.
2.Good aging, durable performance, and wide temperature arrange, it can be useful over thirty years on the condition of -60æ«60æ.
3.Anti-stab and fine friction factors.
4.Canker proof, acid and alkali proof, untoxic.
5.Lower cost per unit area, cost is 1/3«1/2 lower than that of PVC film, glass and cloth.
6.Convevient to install and dependable effect.
Applications of HDPE geomembrane 0.5mm thickness:
1.Environmental protection, sanitation (such as landfill, waste water treatment, toxic and harmful chemicals disposal sites, storage of dangerous goods, industrial waste, construction and demolition waste, etc.)
2. Water (such as impervious, stop water loss, and reinforcing of lakes, and the impervious, slope protection, etc.)
3.Municipal projects (underground subway, engineering underground and reservoirs on the roof, and the park on the roof, the lining in the sewage pipes, etc)
4.Garden (artificial lakes, ponds, the lining of tank in golf course, slope protection, etc)
5.petrochemical (chemical plants, oil refineries, oil tank of fill stations, chemical reactions pond, the lining of settling basin, second lining, etc)
6.Mining (washing and selecting pool, heap pool, ashery, dissolving pool, settling basin, stock dump, lining of tailing pond, etc)
7.Agriculture (reservoirs, drinking water tank, water storage pond, irrigation systems)
8.Aquaculture (fish ponds, the lining of breeding shrimp tank, slope protection of sea slug tank)
9.Salt industry (crystallization pond, thatch or plastic thatch of salt pond, salt membrane)
Technical Data
Art No. | PLC0701 | PLC0702 | |
Item and Type | GL LDPE | GH H(Mid)DPE | |
Material | GL-1 GL-2 | LDPE |
|
Thickness Range (mm) | 0.20mm-2.0mm | 0.20mm-2.0mm | |
Carbon Content(%) | ≥2% | ≥2% | |
Environment Stress Crack Resistance | G/B STANDARD | G/B STANDARD | ≥1500 |
Oxidation Inducing Time at 200 °C | G/B STANDARD | G/B STANDARD | ≥20 |
Tensile Strength (Mpa) | ≥14 | ≥17 | ≥25 |
Elongation (%) | ≥400 | ≥450 | ≥550 |
Right Angle Tear Strength (Mpa) | ≥50 | ≥80 | ≥110 |
Vapor Permeation (g.cm/cm2.s.pa) | ≤1.0x10-16 | ≤1.0x10-16 | |
Soft Point(°C) | ABOVE90 |
| |
Crack Temperature(°C) | BELOW-70 | BELOW-70 | |
Filter Coefficient (cm/s) | ≤10-12 | ≤10-12 | |