AS6M of 180~260V power supply switch with no wire self-powered kinetic wireless wall switch
USD $12 - $13 /Piece
Min.Order:500 Pieces
Qingdao Alptec Safety Equipment Co., Ltd.
AS6M of 1000W load power wall switch with no cabling self-powered kinetic wireless wall switch
Interstitial Monitor for Double Wall Tanks Leak Detection Leakage Detector
Gasoline anti-theft system in service station/petrol station
Earthing Verification Monitors(overfill detection system for oil truck)
AS 6M of 180~260V power supply switch with no wire self-powered kinetic wireless wall switch
specifications of no cabling self-powered kinetic wireless wall switch :
AS 6N | Receiver | Transmitter |
Power Supply | AC 180V~260V(50/60HZ) | Self-powered |
Operating Temperature | -10℃~+50℃ | -40℃~+50℃ |
Range (Open Field) | 70m | |
RF Frequency | 433MHz | |
Power Consumption | <700mW | - |
1000W | - | |
Operating Force | - | <4N |
Dimensions | 66*41*27 mm | 86*86 *17mm |
Weight | 35 g | 58g |
Advantage / features of no cabling self-powered kinetic wireless wall switch :
when you arranging the decoration,you can use without cabling.
when you setup,you can not need wireman to do anything,just 1 minute to set up by yourself.
If you were reading a book in your warm bed on a cold winter's day ,when you need to turn on or off the light, just press the button. you will feel very convenient,and don’t worry about the battery exhausted.
pictures of no cabling self-powered kinetic wireless wall switch :
Operating instruction:
1)work mode
The receiver has been paired to the transmitter before they left
factory. After installation, it's ready to work
2) Learn mode
The remote transmitter has been paired to the receiver at factory.Unless you need to add additional receiver or transmitter,you don’t need to re-paired it.
1.Long press the round button on the center of receiver for 5 seconds
2.Press the transmitter twice in one minutes,and then you can see that they are paired.If not,press the transmitter twice again.
3.Complete and exit the learn Mode automatically.
Note:
No operation in 1 minute or short press button once, the receiver
will exit Learn Mode.
About our company:
We are the manufacturer to reseach and supply for 5 years,and we specialize in kinetic wireless doorbell,self-powered remote control wireless wall switch and self-powered remote control wireless socket.
Our technology introduction is: betteryless wireless doorbell/switch/socket requires no battery and no wire.It uses the nuique energy harvesting technology and ultra-low-power wireless techmology with worldwide patents pending.
We are the first one in the world to ues without battery and cabling,and expend the Market,please support us.
If you have any questions ,you can contact me:
QQ: 3334299558
Skype: Kathy Xiong
Tel: +86 532-86769488
Mobile: +86 15865534367
Fax: +86 532-86881057
Web: /