wide data rate range(0~10M) 2X5 SFF TTL MM Transceiver new products on china market
USD $10 - $100 /Piece
Min.Order:1 Piece
Chengdu Neton Optoelectronic Technologies Co., Ltd.
0~10Mbps 2X5 SFF TTL MM Transceiver new products on china market
NTR-9105M series of transceiver modules are the perfect solution for Low-speed communication networks.
NTR-9105M Small Form Factor (SFF) transceivers comply with the 2×5 standard package defined by the Small Form Factor Multi-Sourcing Agreement (MSA). The transceivers are RoHS compliant and lead-free per Directive 2002/95/EC5.
NTR-9105M SFF transceivers support data rates up to 10Mbps.
NTR-9105M SFF module has been designed to provide good immunity to RF electromagnetic fields and excellent EMC/EMI performance.
Table 1: Order Information
Type | Fiber Type | Wavelength(nm) | Fiber Length(Km) |
NTR-9105M | MM | 1310(FP) | 2 |
1310nm wavelength Laser Transmitter
Up to 2Km on 62.5/125μm MMF
Single 3.3V power supply
Standard 2×5 pin footprint (MSA Compliant)
Operating Temperature Range (0℃ to +70℃)
Duplex LC connector
TTL Signal Input / Output
TTL Signal Detect
Low power dissipation
Compliant with Small Form Factor (SFF) Transceivers Multi-Sourcing Agreement (MSA)
l RS232/RS485/RS422 receptacle fiber transmission
l Fiber System
l Special applying for power systems
Operating of SFF beyond the Absolute Conditions Listed in Table 1 will degrade or damage the products. It’s not implied that the products would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
Parameter | Symbol | Min | Max | Units |
Storage Temperature | TST | -40 | +85 | ℃ |
Relative Humidity | RH | 5 | 95 | % |
Supply Voltage | VCC | 0 | +3.8 | V |
Table 2-- Recommended Operating Environment
Parameter | Symbol | Min | Typ | Max | Units | |
Supply Voltage | VCC | +3.1 | +3.3 | +3.5 | V | |
Supply Current | ITX+IRX | - | 100 | 150 | mA | |
Operating Temperature | Commerce level | TOP | 0 | - | +70 | ℃ |
Data Rate | B | - | - | 10 | Mbits/s | |
Table 3 NTR-9105M Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC= 3.1V to 3.5V)
Parameter | Symbol | Min | Typ | Max | Units |
Transmitter | |||||
Data rate | B | - | - | 10 | Mb/s |
Output Center Wavelength | λC | 1260 | 1310 | 1360 | nm |
Output Spectral width (RMS) | λ | - |
| 3.0 | nm |
Average Optical Output Power | Po | -10 | - | -3 | dBm |
Extinction Ratio | EXT | 10 | - | - | dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 | |||||
Receiver | |||||
Receiver Sensitivity | S | - | - | -16 | dBm |
Maximum Input Power | PMAX | -3 | - | - | dBm |
Operation Center Wavelength | λC | 1100 |
| 1600 | nm |
LOSS Detect Deassert Level | LOSD | - | - | -16 | dBm |
LOSS Detect Assert Level | LOSA | -25 | - | - | dBm |
Signal Detect Hysteresis | PH | 0.5 | - | 4.0 | dB |
Table 4 (Ambient Operating Temperature Ta=25°C, V CC = 3.3V)
Parameter | Symbol | Min | Typ | Max | Units |
Supply Voltage | VCC | 3.1 | 3.3 | 3.5 | V |
Transmitter | |||||
TX_DISABLE Input High | VHI | 2.0 | - | - | V |
TX_DISABLE Input Low | VIL | - | - | 0.8 | V |
TX_FAULT Output Low | - | - | - | 0.4 | V |
Receiver | |||||
Output Resistance | ROUT | 42 | 50 | 58 | W |
LOS Output Low Voltage | VOL | 2.0 | - | - | V |
LOS Output High Voltage | VOH | - | - | 0.8 | V |
Table 5-SFF to host connector pin assignment
Pin # | Pin Name | Description |
1 | VEER | Receiver Ground |
2 | VCCR | Receiver Power Supply |
3 | SD | Signal Detect. Logic 1 indicates normal operation or Logic 0 indicates normal operation. |
4 | NC | NC |
5 | RD+ | Receiver Data Out. AC Coupled |
6 | VCCT | Transmitter Power Supply |
7 | VEET | Transmitter Ground |
8 | TDIS | Transmitter Disable |
9 | TD+ | Transmitter Data in. AC Coupled. |
10 | NC | NC |