Specifications

1, RTV,Neutral Curing; 
2, Transparent, non-discoloring, fast curing; 
3, Excellent weatherproofing performance.

Good Compatibility Anti-fungus Silicon And Water Silicone Sealant

1.Structural assembly for point supported glass and whole transparent glass;

2.Assembly for other various glass of window and door;

3.Seal and joint for laminated glass;

Standard: 

1MG GBI 6776-2005 Standard ;

Color:
Fast Cure Kitchen Anti-fungas Acetic Silicone Sealant is available three standard colors:grey, clear, black and the other colors base on customer's requirement.

Limitations:                                                                                                                                                
1. Not recommended for construction bonding.
2. Not suitable for frost-laden or wet surfaces. 
3..Not recommended for oil contained or blended surfaces. 
4. Not suitable for confined joint(the sealant need atmospheric moisture for cure)
5. Not suitable to use when the temperature of the materials surface is lower than 4°C or higher than 40°C .

Inner Packing:                                                                                                              
260ml,280ml,300ml plast cartridge, 24PCS/CTN

Outer Packing:                                                                                                            

Dimensions for 24pcs of 280ml: 300×200×235 (mm)

Storage and usable life:                                                                                            
12 months shelf life if stored below 27°C in cool, dry places after the date of production.

Typical Properties:

• Type: China Supplier construction chemical silicone type door seals silicone adhesive sealant
• Density(g/m):1.28
• Capacity movement:±30%
• Skinning time:10-15mins
• Drying time(2mm/h):6-8
• Dry(4mm/h):10-13
• Hardness shore:22±2
• Curing time(h):36
• Slump (mm):0
• Tensile strengh(mpa)1.21
• Elongation(%):285
• Modulus 100(mpa):0.92
• Extrusion rate(g/min):220
• Skin drying time and fully dring time under 23°c and 50% humidity

How To Use it:

OEM Service:

FAQ

1.How to get a sample?

a.3-5 days after confirming all details

b. free sample, pay freight

2.How about the OEM service

Welcome OEM,Customer's own brand

3.Agent's wanted?

Welcome general agent all over the world

Factory information: