Product Details

Specifications

1.Mainly composit: SiO2 ;
2.Purity:98% sio2
3.Bulk density: 400-500 g/L
4.No dust
5.specification: white with color

Specifications

1.Mainly composit: SiO2 ;
2.Purity:98%
3.Bulk density: 400-500 g/L ; Wide pore
4.No dust
5.Appreance: white with color

Silica Gel catlitter is a new and innovative litter product,and often used as padding material in raising cat and other pets ,it can absorb moisture instantly and leave litter dry to the touch, the non-toxic SiO2 is the mainly compositation,so it is safe for pepople in domestic use.

product:

1-8mm, white+ 3 %-5% COLOR granules

Advantage:

1. High absorption, high speed

It can absorb dejecta,stale and special smell within several seconds;

Restrain(inhibit) growth of bacteria,keep clean and clear,as well as safe

and secure environment;Meanwhile ,it can absorb air and water in the

air to clean the air, thus the environment is well kept under good state.

2.Low dosage, long service life

One 3.8l cat litter can be used for one month for one cat.

3.Multicolor,pet will like it

Multicolor cat litter and various fragrant cat litter can attract the pets a

lot and will be accepted by pets easily.

[use]

1.Fill litter box with silica gel cat litter to the lever of 1.5 inches;

2.Clean up the rubbish after use to keep clean periodically;

3.For more than one cat, you can reduce the period of replacing cat litter in proportion,

rather than placing much more cat litter in the box,the proposed way to use one 1.8kg

bag is following:one cat, one month,two cats,about 15 days,three cats,about 10 days;

4.After the solid waste is dehydrated,scoop it out without any litter;

5.Store Cat litter box or silica gel cat litter in clean,non-moisture places,to extend its

service life.

Specification:1-8mm

Item		Standard specification	Test report result	The product is certificated
Qualified size ratio % ≥		90	94.6
Quantity of Granules under the minimum limit %≤			1.6
Quantity of Granules above the maximum limit % ≥			3.8
Rattler loss %≤		10	3.92
Bulk density,g/L≥		400	467
Adsorption capacity	RH=20%,% ≥
	RH=50%,% ≥
	RH=90%,% ≥
Loss on heating under 150 ^OC,%≤		5	4.89
Pore volume ml/g, % ≥		0.76	0.85
Identification of the report:
Note: every batch has one report result; please confirm it before importation for test.