Specifications

plastic grinder
1. Advanced desgin
2. Convenient installation
3. Low powder consumption
4. ISO 9001:2000

 

  SMP series plastic milling machine

Application  

 

1.SMP series Plastic Pulverizer is a prefect machine for  processing  and grinding  thermoplastics material  such as PVC,PE,PP,EVA,etc, with high output and thin powder.

 

2.It is a special equipment to recycle left bits and pieces of plastic industries.It is proved by plastic product major factory after practical operation that adding 20%-30% milled waste plastic powder will not change any physical and chemical properties index compared with brand new material.

 

3.So it is the optimum machine to reduce cost and curtail expenditures, and to recycle the waste and defective goods.

 

Features

1.With water cycle and wind cooling, the machine can be applied into processing heat sensitive material. 

 

2.With the tail-wagging air stream (partly eddy flow) produced by the tail-wagging of the main shaft capstan of the machine, the input tail-wagging materials collide strongly with the board and the cutting blade, and was grinded into powdery (without sieving).

 

3.Both the board and the cutting blade are made of abrasion-resistant steel, with excellent performance after heat treatment.

 

4.With severeness of framework, the volume of the machine is quite small. If you open door closure, you can maintain it. It is completely airproof and without any dust leakage.

 

5.With winding reclaiming equipment, the machine is features by cooling materials evenly, quick cooling and some other characteristics.

 

Main parameter

Model	SMP-400	SMP-500	SMP-520	SMP-550	SMP-600
Milling chamber DIA:	Φ400	Φ500	Φ520	Φ550	Φ600
Rotor QTY	3	3	3	3	3
Main Speed RPM.	3800	3900	3900	3900	3900
Main motor power:	30KW	30KW	37KW	37KW	45KW
Close blower power	0.75kw	0.75KW	0.75KW	0.75KW	0.75KW
Blower power	2.2kw	2.2KW	3KW	3KW	4KW
Final powder size	12-120 micron	12-120 micron	12-120 micron	12-120 micron	12-120 micron
capacity	50-120kg/hr	150-200kg/hr	180-250kg/hr	200-300kg/hr	300-550kg/hr
Round Vibrating sieve	without	Customized	Customized	Customized	Customized
Dust collecting system	without	Customized	Customized	Customized	Customized
Cooling system	Water cooling	Water cooling	Water cooling	Water cooling	Water cooling
Machine weight	850kgs	1200kgs	1250kgs	1300kgs	1550kgs
Dimension	2200*800*2100 (mm)	5900*1450*2900 (mm)	5900*1450*2900 (mm)	5900*1450*2900 (mm)	5900*1450*2900 (mm)