Product Details

Specifications

(Manufacturer)PLC two-pot autoclave retort

Product use

1. Plastic containers: PP bottle, HDPE bottles.

2. Soft bag packaging: tin foil bag, transparent bag, vacuum bags, high-temperature cooking bags, etc.

3. Specialist of printed tinplate: steel and glass products.

Product descriptions

Specifications

1. SUS304/SUS316L
2. high efficiency
3. energy saving
4. simple operation

It's suited as the two-stage sterilization equipment of bag-packing or case-packing food. It is composed of technology tank, hot water, cold water tank, heat exchanger, all kinds of pump valve, connection pipe and semi-automation control system. The soft water inside the tank keeps on spraying fan-shaped and belt-shaped hot water which pose a wave-like motion to the being sterilized after it goes through the heat exchanger or after it cools off. The heat diffusion is rapid and well distributed. It can reduce the possibility .

Structure:

The horizontal sterilizer body: including the body, safely interlocking equipment, the cover, the swivel, the track, the seal ring, the idler wheel, the locking block, the steam nozzle, the cooling water pipe, the gate valve and so on.

Technical parameters

Model		RJD-500	RJD-700	RJD-900	RJD-1000	RJD-1100	RJD-1200	RJD-1300	RJD-1500
Sterilizing Tank	ID (mm)	500	700	900	1000	1100	1200	1300	1500
Sterilizing Tank	Height (mm)	800	1200	1500	2000	2400	3000	3750	3750
Volume of the Inside Tank (m3)		0.2	0.5	1	1.8	2.5	3.5	5.2	7
Sterilizing Baskets		1	2	2	2	3	4	4	4
Steam Consumption kg/cycle		85	150	250	285	350	385	420	500
Design Temperature (C)		147
Design Pressure (Mpa)		0.35
Steam Work Pressure (Mpa)		0.4-0.6
Cooling Water Work Pressure (MPa)		0.3
Compressed Air Work Pressure (Mpa)		0.7
Outside Sizes	L (mm)	1150	1650	2050	2600	3050	3700	4500	5650
	W (mm)	750	950	1150	1250	1350	1450	1550	1750
	H (mm)	1000	1200	1400	1500	1600	1700	1800	2050

note:

1,The parameters are standard configuration, any requires, please put forward.

2,The parameters should be provided: material, sterilizer process, special requirements, and so on.

3,Accessory equipment: gas holder ,air compressor, water storage tank , boiler(prepared by customer ).

Technical requirements:
1. File support: the structural size drawing of the device (PDF) and instructions are available.
2. Required by operated function, the following criteria are adopted to design, manufacture and test
A. << Standards for quality control of pharmaceutical production (Revised 1998)>> terms of Chapter IV 31-37;
B. << The Steel Pressure Vessel (GB150-1998)>>;
C. << The Steel Welding Normal Pressure Vessel (JB/T 4735-1997)>>;
D. << Food Machinery Safety and Heath (GB 16798-1997)>>.

Pictures

Our services

Packaging&Shipping