S-360-12 single output ac dc 360w 12v 30a power supply for 3D printer

Features

1.High Efficiency and good price

2.Built-in EMI filter

3.100% full load burn-in test

4.Low output ripple and noise
5.Protection:Over load/Over voltage/Short circuit

6. THREE YEARS WARRANTY!

Specifications

Model Specification	S-360-5	S-360-7.5	S-360-12	S-360-13.5	S-360- 15	S-360-24	S-360-27	S-360-48
DC Output voltage	5V	7.5V	12V	13.5V	15V	24V	27V	48V
Output voltage range(Note:2)	±2%	±2%	±1%	±1%	±1%	±1%	±1%	±1%
Rated output current	50A	40A	30A	26.6A	24A	15A	13.3A	7.5A
Output current range	0~50A	0~40A	0~30A	0~26.6A	0~24A	0~15A	0~13.3A	0~7.5A
Wave and noise(Note:3)	75mVp-p	75mVp-p	75mVp-p	75mVp-p	75mVp-p	75mVp-p	75mVp-p	75mVp-p
Inlet stability(Note:4)	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load stability(Note:5)	±1%	±1%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
DC output power	250W	300W	360W	359.1W	360W	360W	359.1W	360W
Efficiency	78%	78%	83%	83%	83%	84%	85%	86%
Adjustable range for DC voltage	4.5~5.6V	6~9V	10~13.2V	12~15V	13.5~18V	20~26.4V	26~32V	41~56V
AC input voltage range	85~132VAC/176~264VAC selected by switch 47~63Hz, 248~370VDC
Input current	6.5A/115V 4A/230V
AC Inrush current	25A/115V 50A/230V
Leakage current	<3.5mA/240VAC
Overload protection	105%-150% Type:cut down output Reset: auto recovery.
Over-voltage protection	5.75~6.75V	9.4~10.9V	13.8~16.2V	15.5~16.2V	18~21V	27.6~32.4V	33.7~39.2V	57.6~67.2V
High-temperature protection	ERH3≥65°C~70°C Fan on, < =55°C~60°C Fan off, >=80°C~85°C, cut off output (5~15V)~(24~48V)
Temperature coefficient	±0.03%/°C(0~50°C)
Setup, rise, hold up time	200ms, 100ms, 20ms
Vibration	10~500Hz, 2G 10min,/1 cycle. Period for 60min, Each axes
Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Working temperature and humidity	-10°C~+60°C(Refer to output derating curve), 20%~90%RH
Store temperature and humidity	-20°C~+85°C, 10%~95%RH
Overall dimension	19911550mm(LWH)
Weight	0.95 Kgs
Safety standards	Design refer to UL1950
EMC standards	Design refer to FCC part 15J class A
Note: 1. The parameter under the testing condition: 230VAC input, rated load, 25°C70% RH. Temperature. 2. Tolerance: Including setting tolerance, circuit stability and load stability. (Note: 5). 3. Wave test: Adopting “A12” double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: the lowest voltage will be up to the highest voltage when the circuit overload. 5. Load stability test: The load is from 0% to 100%. 6.C3, 4 must be knocked down