Specifications

Waste Oil to Diesel Fuel Refinery
1 Low Processing cost
2 Simple to operate by 2~3 people
3 High recovery rate

No Pollution Waste Oil to Diesel Fuel Refinery

 

General Description

 

The waste lubricant oil to Diesel fuel oil machine is widely used for different kinds of engine oil, industrial lubricant oil and all other lubricant oil.

 

It can covert black waste engine oil, industrial lubricant oil and all other lubricant oil into diesel fuel oil and Gasoline by Catalytic distillation.

 

Waste Oil to Diesel Fuel Refinery   Photos for reference:

 

 

I.Technical Feature:

1.This is an environmental-friendly and energy-saving project, which benefits the human beings.

2.After-treatment, the final product is diesel fuel oil which could be use as fuel oil.

3.Add some catalysts in the process to make the pyrolysis temperature low and get oil with better quality.

4.It use the vacuum distillation technology, the oil temperature in the process is far lower than the distillation range under the atmospheric distillation, so that it reduces the energy consumption and the costs.

5.it use the to-be-treated oil to exchange the heat, it not only can efficiently cool the system, but also provide the heat to heating the to-be-treated oil.

6.The structure of the whole system is reasonable, simple and it is easy to maintain. The final wastes can be used as fuel or other purpose.

7.it improves the efficiency and reduced the energy consumption by using the direct heating.

 

II.Technical Advantages

1.It features low processing cost. The processing cost is about RMB200-300 per ton.

2.It’s simple to operate by two or three persons.

3.It’s an environmental-friendly project and totally enclosed type. The facility does not emit or discharge any hazardous gas to human and environment. The waste of colloid, asphalting and carbon black will be entered into the residual oil and can be used as fuel oil

4.It’s widely used in many industrials, such as waste lubrication oil, crude oil, plastic oil, etc.

5.It realizes high recovery rate by about 85%. The specific recovery situation is subject to the raw material condition.

6.The final diesel oil has no color change and no bad smell for long term storage.

7.It takes the most advanced technology of used engine oil recycling in the world, which is suitable for large-scale industrial production.

III.Technological process

It includes three phases in the whole process.

(1)Pretreatment process

(2)Distillation process

(3)Refining process

 

 

IV.Quality of products

The quality of our technology products is good, can satisfy with the Vehicle requirements.
The specific index as following:

 

Item	sample A	sample B	sample C	normal 0# diesel oil
Undissolved ubstance    mg/100ml	2.2	2.1	2.3	≤2.5
carbon residue wt%	0.31	0.28	0.3	≤0.3
condensation  point ℃	-1	-2	-1	≤0
CFPP ℃	3.0	3.0	4.0	≤4.0
Flash point ℃	65	67	70	≥55
Copper Corrosion (50 ℃/3h)/level	1	1	1	≤1

 

V.After-treatment oil report

 

 

VI.Other Notes

The concrete product quality status is not only determined by technology, but also the raw material. Therefore,

 

if you want to build a set of device, analyze the raw material data first, such as the data of water content,

 

condensation point and the distillation boiling point. Only in this way, the device can be designed pertinently,

 

the production could be optimal, and you can have the best quality at the lowest cost.

Yuneng products list:

 

1. Insulation Oil filtration machine:

ZJA Ultra-high Transformer / Insulation Oil filtration machine (1000KV, ±800KV, 750KV, ±660KV project) (2 stage vacuum)

 

ZJA High-vacuum Transformer / Insulation Oil filtration machine (110KV-500KV project)) (2 stage vacuum)

 

ZJB Transformer / Insulation Oil filtration machine (≤110KV) (one stage vacuum)

 

ZJ Vacuum Pumping machine (extract vacuum, dry transformer)

 

GF Dry Air Generator (produce dry air for operators to maintain transformer, reactors…).

 

JZ OLTC (on-load tap changer) online Oil filtration machine

 

Quantitative oil injection machine (customized product)

 

2. Turbine Oil filtration machine:

JT coalescing dehydration oil filtration machine (dehydration by special filters)

 

DYJC online turbine oil filtration machine (dehydration by special filters and vacuum system)

 

ZJC-T vacuum oil filtration machine for turbine oil (dehydration by vacuum system)

 

3. Lubricating Oil filtration machine:

 

 ZJC-R vacuum Oil filtration machine for lubricating oil (machinery oil, hydraulic oil, compressor oil, coolant oil, cutting oil..)

 

ZJC-M Oil filtration machine for OCS. (oil with high viscosity 100-320cst at 40℃)

 

4. Other kinds of oil filtration machine:

KYJ fire-resistance oil filtration machine (EHC oil)

 

LY plate-frame pressure oil filtration machine (simple, paper filtration)

 

YL mobile oil filtration machine (simple, cheap)

 

5. Waste oil regeneration machine (by chemicals or by high temperature distillation)

YNZSY used oil filtration machine (by chemicals)

 

YNZSY-LTY used tire oil filtration machine (by chemicals)

 

Waste oil distillation machine  

 

6. Oil tester/ analyzer:

Dielectric oil breakdown strength tester

 

Water content tester

 

Inline Digital Flow Meter and Totalizer

 

Viscosity analyzer

 

Flash point analyzer (close cup)

 

Flash point analyzer (open cup)

 

Interfacial tension analyzer

 

Gas chromatograph