US AC PINS the power adapter universal travel adapter with usb charger
USD $2.5 - $5 /Unit
Min.Order:1000 Units
Shenzhen NiteRay Technology Co., Limited
Wall plug 10W AC DC adapter
PRODUCT HIGHLIGHT:
PROTECTION:
RELIABILITY:
| SAFETY APPROVALS:
EMISSIONS:
IMMUNITY:
|
Description | Symbol | Min | Typ | Max | Units | Comment | |
Input | |||||||
Voltage | VIN | 90 | 120/240 | 264 | VAC | 2 Wire no Protective Ground | |
Frequency | FLINE | 47 | 50/60 | 63 | Hz | ||
No-load Input Power(230VAC) | 0.3 | W | |||||
Efficiency | η | 75 | % | ||||
Inrush Current(240Vac) | I | 40 | A | ||||
Environmental | |||||||
Operating Temperature | T | 0 | / | 40 | oC | Free convection, Sea level | |
Non-operating temperature | T | -20 | / | 80 | oC | Free convection, Sea level | |
Operating humidity | T | 10 | / | 90 | %RH | Non condensing | |
Non-operating humidity | T | 10 | / | 90 | %RH | Non condensing |
INPUT CONDITION | DC OUTPUT VOLTAGE | DC OUTPUTCURRENT | OUTPUT VOLTAGE PRECISION | RIPPLE &NOISES | REGULATION | MAXIMALOUTPUT POWER | ||
LINE | LOAD | |||||||
Input Voltage: 90-264Vac Frequency: 47-63Hz Input current: 0.3A | 1 | 21-24V | 0-0.57A | 5% | 150mV | ±1% | ±5% | 12W |
2 | 16-20V | 0-0.75A | 5% | 150mV | ±1% | ±5% | 12W | |
3 | 10-15V | 0-1.2A | 5% | 100mV | ±1% | ±5% | 12W | |
4 | 9.4-9.9V | 0-1.06 A | 5% | 100mV | ±1% | ±5% | 10W | |
5 | 8.8-9.3V | 0-1.14A | 5% | 80mV | ±1% | ±5% | 10W | |
6 | 8.2-8.7V | 0-1.22A | 5% | 80mV | ±1% | ±5% | 10W | |
7 | 7.6-8.1V | 0-1.32A | 5% | 70mV | ±1% | ±5% | 10W | |
8 | 7.0-7.5V | 0-1.43A | 5% | 70mV | ±1% | ±5% | 10W | |
9 | 6.4-6.9V | 0-1.56A | 5% | 60mV | ±1% | ±5% | 10W | |
10 | 5.8-6.3V | 0-1.72A | 5% | 60mV | ±1% | ±5% | 10W | |
11 | 5.2-5.7V | 0-1.92A | 5% | 60mV | ±1% | ±5% | 10W | |
12 | 4.6-5.1V | 0-2.17 A | 5% | 50mV | ±1% | ±5% | 9.2W | |
13 | 4.0-4.5V | 0-2.0A | 5% | 50mV | ±1% | ±5% | 9W | |
14 | 3.4-3.9V | 0-2.0A | 5% | 50mV | ±1% | ±5% | 7.8W | |
15 | 2.8-3.3V | 0-2.0A | 5% | 50mV | ±1% | ±5% | 6.6W | |
REMARK: (ripple and noise) 1. Measurements shall be made with an oscilloscope with 20MHz bandwidth. 2. Outputs shall be bypassed at the connector with a 0.1u F ceramic disk capacitor and a 10u F electrolytic Capacitor to simulate system loading. |