Product Details

Specifications

Ceramic pavement markers1.4 inches
2.white or yellow
3.Retro Reflective Angle:360 degree
4.Roadsafe

Ceramic pavement markers

High(low) temperature resistant TemperedCeramic Reflector

Ceramic road stud

Ceramic road stud, road stud,reflective road stud
4 inches

Specifications

1.Material Ceramic

2.Size:100 100MM(4inches)

3.Color:White/Yellow

4.Shape:Round

5.Retro Reflective Angle:360degree

6.Single weight 260g

7.Packaging Quantity:60/box

8.Packaging Size:33*25*23CM

9.Packaging:Carton

10.G.W:17KG N.W:15KG

11.Weathering Resistance Properties over 16280h

12.AntiCollision Resistance over 25ton

13.Lead Time 2000pcs/day

14.with reflector.
15.Anti-collision resistance>25 tons
16.Reflective angle:360'

Name

Ceramic Road Stud

Iterm No.

RSG-RS-C-150A(without reflector)

Material

Ceramic

Size

150*150MM(6inches)

Color

(white/yellow)

Retro Reflective Angle

360°

Output

5000/kiln

Single weight

1350g

Packaging Quantity

16/box

Packaging Size

34X34X24CM

Packaging

Carton

Gross

21KG

Net weight

22.6KG

Weathering Resistance Properties

>16280h

Anti-Collision Resistance

≥25ton

20" Quantity

14864pcs

•Ceramics road stud is composed of high-temperature proessing porcelain base and opaque, glazed surface.

•Good wearing resistance and impact resistance.

•Ceramics road stud glazed finish protects against weathering especially during rain, excellent day time visibility, avaiable in high visibly white or yellow 4. A texture bottom helps them easily installed with epoxy resin

Ceramic Road Stud's Characteristics:
Consist of a heat-fired ,vitreous, ceramic base and a heat-fired ,opaque, glazed surface to produce the properties
Ceramic markers'' glazed finish protects against weathering especially during rain, excellent day time visibility.

Non-reflective ceramic road markers are used mainly on roads and streets inside cities where street lightings are available. Unlike road markings paints which are subject to soiling ceramic road markers retain their colours and are soil-resistant.

The rumble effect of the raised ceramic markers deters drivers from running over it and gives a sensory and audible warning to drivers straying out of lane.

1.Being consist of a heat-fired, vitreous, ceramic base and a heat-fired, opaque, glazed surface

2.Glazed finish protecting against bad weather especially raining

3.Excellent day time visibility

Glass road stud, 360 degree Cat Eyes

1. Use drill stop on the drilling bit to drill hole (Diameter:100mm, Depth:25mm)

2. Use hammer and chisel to remove the asphalt or concrete debris in the hole.

3. Use high pressure air blower to blow away the sand and water in the holes. Or use sponge to absorb the water.

4. Use depth gauge to test the proper depth of holes. Modification may require to if too deep or too shallow.

5. Use epoxy or asphalt adhesive to fasten reflector. Asphalt adhesive is suggested for installation on freeways or high traffic areas or for larger road projects, because it is cost and time effective. Epoxy is suggested for minor or trivial road works.

6. Place the glass road stud in the hole and turn about 30 degrees. Use a rubber hammer to secure the position by gently pounding the glass dome.