Product Details

indoor/outdoor light vertical electric wheelchair for disabled people from china supplier

1.Product Description

1).Type:Spray type and Stainless Steel type. ( according to material)

2).Lift height: 0.65-12.0m working range,

3).Load capacity:150-300kg

4).Application: indoor and outdoor applications.

5).Features:novel design, perfect stability and safety, nice appearance, low noise and so on

6)Nonpit installation ,directly fixed to concrete floor (the concrete floor below the platform

shall not be lower than the ground .)

7) Technical parameters

Name	No.
Wheel-chair vertical lift	VL/Y accessible lift platform
Platform size	1400mm(L)* 1000mm(W) OR as your demand
Max Platform Height	12000(mm)
Min Platform height	65mm
Speed	0.06-0.1 m/s
Load capacity	300KG
Control voltage	24V/DC
Power Output	0.75kw-2.2kw
Power Input	220V/50HZ/25A (or customized for local power supply)
Drive System	Hydraulic
Control Mode	Inching Switch or Automatic
Drive Control	Self-resetting system
Overload	Protection Over current relay
Material of Platform	Stainless steel
Guard panel & drive cabinet (framework)	304 stainless steel
Auto matical ramp	yes
Column switch	Two column switch, one is on the ground floor, one on the first floor
Operation Panel	Polished Stainless steel(up down and Emergency drop valve)
Safety Wane Working Range	75
Working Condition	Both indoors and outdoors
Working temperature	From -20 ~60
Installation	Non-pit installation, directly fixed to concrete floor (the concrete floor below the platform shall not be lower than the ground)
Control Device	Calling box (installed on the wall nearby) and remote controller(Extra optional)
Emergency Stop	The lifting and lowering process can be stopped immediately by pressing the emergency button.
Safety device	Safety Interlock	Lock the platform when it is out of control
	Safety Sensor	The operation must be stopped immediately the safety edge meets obstacles during operation.
	Emergency lowering	The platform can be lowered by opening hydraulic valve manually or rolling screw rod.
	Auto-flap	Turn up after lifting

Optional Configuration

Security hoistway	Aluminum alloy,Glass hoistway
Door protection	Security doors and platform installation of electronic lock linkage circuit to ensure safety
DC models	Built-in automatic battery charging system, ensure the normal use of the machine after power failure
Auxiliary control	Wired auxiliary control box can be installed at the customer location and machine circuit linkage operation needs to run
Chassis panel	304 stainless steel wire drawing board / Electrostatic spraying
Platform guardrail	304 stainless steel wire drawing board / Electrostatic spraying
Lifting height	According to customer needs to provide 12000mm (Lift from the ground floor) models