Specifications

1 Intercooler type:bar and plate
2 Make your engine cool
3 Highly polished end tank

• Only 1" thick, this truly is a slim radiator.
  
• With eight mounting points, you have the mounting flexibility to have the water inlet and outlet on either side.
  
• All aluminum construction provides optimum cooling efficiency with water or antifreeze/coolant.
• Water inlet and outlet are 1/2" NPT female threads, just like most water-to-air intercoolers.
• These radiators ship with a radiator cap on top and a drain plug on the bottom.
• These radiators feature a 1/8-27 NPT tap that would allow you to install a temperature sending unit. They ship with a plug installed in case you do not wish to use this feature.
• These can be used for up to 1200 HP.

 

 

The intercooler: 14.5" X 5" X 4.5"

• 100% Lightweight aluminum - No epoxy used in core
• Recommended for up to 550 CFM / 600 HP
• Pressure Drop: Less than 0.1 PSI. 
• Air Inlet/Outlet: 3.0"
• Water Inlet/Outlet: 1/2" NPT
• Maximum water/air pressure: 70 PSI
• Core size: 9.75" X 3.75" X 4.5"

 

 

• The unique fan blade design allows you to pull or push air with the same velocity. The motor is easily reversible for any application. Most other fans are designed for one-way air flow.
  
  
• Many aftermarket fans don't include all the mounting hardware needed. Our fan kits include the mounting feet AND the through-radiator mounting ties (that sell for $5-$7 at most auto parts stores).
• Our 10" fans have TEN points for the mounting feet giving you flexible installation options.
• These truly are slim fans. They measure only 2.5" at the deepest point, making them ideal for cramped areas.
• Additional Specs: 12-15V, 4 Amps, 1250 CFM
• Width: 11.5"
• Height: 10.75"

 

We are a professional aluminum plate-bar type heat exchanger manufacturer in China.