Product Details

Flat Panel Solar Water Heater with high quality from China

function:

1. Full auto-control water function.
2. Constant temperature, timing electric heater(Power 1.5-4.5KW).
3. Setting temperature(30centigrade-90 centigrade),setting water level(50%-100%).
4. Manual water, supply water of control temperature, auto-water after 15 minutes without water auto- stop after full.
5. Prevent frostbite circulation (Forcing circulation when water temperature of the heat collector below 2 centigrade.
6. Manual circulation ( the time of circumfluence could been set 5-99 sec.)
Once open, hot water coming.
7. Supply hot water by manual pressure, manual close pressure or auto-close pressure function after 30 minutes.

8. Avoiding without water heater function (supply water level to 50% firstly ,then auto-startup electric heater whenwater level below 50%)

Flat panel Balcony solar water heater Feature:

1. Safe and steady

Flat plate solar collector uses all cooper fluid tube, and the components are not easy to be damaged, so the system operating is steady.

2.Pressurized operating

Working pressure is 0.6Mpa and test pressure is 1.0Mpa. The hot water is forced to stream out from the top and convenient to use.

3. High heat efficiency

Absorbing coating of the collector is black chrome and blue sputtering. The absorbing rate is 92-96%, and emission rate is 5%±2%, so heat efficiency is high.

4.Good temperature preservation

The illustration layer is 50mm with constant temperature and high pressure quantitative foam, and it is less than 5 Celsius Degree per 24.

5. Long using life

Inner tank is 1.2-2.0mm stainless steel that resists high temperature and corrosion, and keep 15 years using life.

Specification:

-Inter tank:SUS 304-2B food grade stainless steel with thickness of 0.4mm-0.6mm

-Outer tank:Stainless steel/galvanized steel /color steel with thickness of 0.35mm

-Insulation layer thickness of tank:55mm

-Absorber dimension L*W*T:1840*980*0.15

-Absorber material:Red copper

-Header material:Copper T2

-Header tube size(L*W*T):1060mm*Φ25mm*0.62pcs