Welcome to compare with our palm kernel oil pressers YZYX140-8WK has special advantages as below:  

1. With heater to automaticly heat the press chamber, no need warm up the chamber by pressing cake first.

2. No need to heat the chamber again when brokenly production.

3. The most suitable capacity of 10ton/24h, oil content of residue cake ≤8%.

Under the combined effects of several forces, such as the pressure generated as the space in the squeeze chest becoming smaller, the propulsion of the revolving spiral axes, the resistance of the multilateral arc curves on the squeeze loops, the extrusion & friction between the oil plants, oil was squeezed from the oil plants coming out of the squeeze bars and the grooves of the squeeze loops. The residue is conveyed to the end of the press chest and discharges in thin strips of oil cake from the space between the cake adjuster and the loop for cake out. Then the whole separation process of oil from oil plants is completed.

Meanwhile, the heater to automaticly heat the press chamber, no need warm up the chamber by pressing cake firstly. Also no need to heat the chamber again when brokenly production. 

1. Welcome to compare with our palm kernel oil pressers YZYX140-8WK suits for many oil plants, such as rapeseeds, cotton seeds, soybean, shelled peanut, flax seeds, sunflower seeds and palm kernel, etc.

2. Medium and small oil refinery, oil mill and private oil squeezing workshop.

3. Performs well both in cold pressing and hot pressing.   

1. We supply spare all year around.

2. We supply technical solutions and helps for buyers at any time. 

3. We have professional team, help uses design and plan the oil refinery's construction.

FAQ:

1. Delivery time. 
   ---20~30 days after order confirmation. We need time to prepare machine according to exporting standard, wear-in, making wooden box, fumigation and suitable ship arrangement from forwarder.
2. If I don't know how to operate this machine? how can I do?
   ----Our machine has been tested OK and fully assembled before shipping, customer just needs to make
   2~4 hours wear-in and then can work.
3. What's wear-in for new machine?
   ---- use 10 KG oil cake + 1KG sand + 1KG water, mix them, put in oil press, wear in 3~4hs.
   1st hour, adjust oil cake thickness as 3mm.
   2nd hour, adjust oil cake thickness as 2.5mm.
   3rd hour, adjust oil cake thickness as mm.
4. What are cold press and hot press?
   ----Cold press is pressing dry and raw seeds. Usually need to press 2 times to get maximum oil.
   ----Hot press is pressing roasted seeds. Usually only press 1 time to get maximum oil. peanuts roast
   to 125~130 degree with 1~2% moisture. (We produce seeds roaster heated by economical fuel.)