11.1V/2200mAh 18650 li ion high rate rechargeable battery for GPS
USD $2.84 - $5.17 /Piece
Min.Order:1000 Pieces
Shenzhen HSB Technology Co., Ltd.
Customized 36V/8-10Ah 18650 li ion high rate rechargeable battery for E-bike
36V/8.8Ah 18650 li ion high rate rechargeable battery for E-bike
3.7V/2200mAh 18650 li ion rechargeable battery for solar lantern, torch, floodlights
14.8V/2200mAh 18650 li ion high rate rechargeable battery for vacuum cleaner, LED Lighting, UPS
24V/20Ah 18650 li ion/ LiFePO4 rechargeable battery for golf, cart, club car
rechargeable li ion battery 18650 3.7v 2200mah ICR18650H-3S1P | |||
Electrical Characteristics-Battery Cells | |||
Model number: | FST-2200 | ||
Nominal Voltage: | 3.7V | ||
Nominal Capacity: | 2200mAh | ||
Cut-off voltage | 3.0v | ||
Shape | cylindrical | ||
Cycle life | 500 times | ||
Memory effect | no | ||
Internal impedance | <=60mΩ | ||
Max. discharge: | 2C | ||
Standard discharge curret: | 0.5C | ||
Typical Weight: | 44g | ||
Dimension: | 18.3mmx65mm | ||
Color | argentate or blue | ||
Discharge temp range: | -20°C-+60°C | ||
Storage( Recommended): | +20°C--25°C | ||
Key Features | Main Applications | ||
• High quality 3.7V li-ion battery | • GPS tracking, pocket DVR | ||
• no memory effect and rechargeable | • Automatic vehicle locator, mobile phones | ||
• light weight | • Blue-tooth headsets, GPS navigators, MP3 player | ||
• With PCB for all protection | • Mobile phone, PDAs | ||
• Higher energy density | • Medical carts, telecom device | ||
• Long cycle life : 500 times | • Marine equipment | ||
• Short circuit protection and over current protection are avaliable | • Professional electronics | ||
• Avaliable terminals: soldering tabs, wires, connectors | |||
Long-term Storage | |||
The cell should be used within a short period after charging because long-term storage may cause loss of capacity by self-discharging. If the cell is kept for a long time ( 3 months or more), it is strongly recommended that the cell isstored at dry and low-temperature and keep the cell(s) at a half-charged state. The cell should be shipped in 50% charged state. In this case, OCV is from 3.65 to 3.85V. Our shipping voltage is 3.75-3.80V because storage at higher voltage may cause loss of characteristics.: - over a period of 1 month: -5 ~ 35°C, relative humidity: ≤75%. - over a period of 6 months: 0 ~ 25°C, relative humidity: ≤75%. Keep the cell(s) at a half-charged state. |
Model | HSB-3S1P-2200 |
Nominal voltage | 11.1V |
Nominal capacity | 2200mah |
Size(customized) | thickness × width × length (mm) |
Can be customized | |
Max charge current | 2C |
Charging method | charge with constant current 1C to 4.2v,then charge with constant voltage 4.2v, till charge current less than 0.01C |
Max discharge current | 4.2A or customized |
Discharge cut-off voltage | 3V, the over-discharge detection voltage of PCM |
Operating environment | Charging, 0°C ~ 45°C ; 65±20%RH |
Discharging, -20°C~60°C ; 65±20%RH | |
Storage environment | -20°C~45°C |
65±20%RH | |
storage for a long time(>3 months) and the storage condition shall be:<35°C;65±20%RH; | |
CycleLife | >500times |
Charging Attention | Charging current and charging voltage should be less than specified in the Product Specification. |
The charger shall be designed to comply with Specification. | |
It is dangerous that charging with higher current or voltage than Product Specification may cause damage to the cell electrical,mechanical safety performance. |