Product Details

Made in China good price compact type Mag Flow meter

QW-LUGB electromagnetic flow meters follow the Faraday law of electromagnetic induction. They can be used to accurately measure the flow rate of liquids which are electrical conducting, caustic, and mixed with liquids and solids. They are widely used throughout industries of petroleum, chemical engineering, pharmacology, papermaking, electric power, environmental protection and so forth.

Specifications

Size:	DN6~DN2800
Medium:	Conductive liquid, slurry
Medium Temperature:	E grade∠60°C.H grade∠180°C
Conductivity:	≥5 u S/cm
Accuracy:	±0.25% . ±0.5%
Repeatability:	±0.1% . ±0.17%
Rated Pressure:	1.6MPa, 2.5MPa, 4.0 MPa(or specified by customer )
Display :	Instantaneous flowrate, total flow, velocity, flowrate percentage with back light
Signal Output:	4-20mA current output, pulse output, pulse output, RS-485, Hart.
Power Supply:	AC:85V~265V, DC:18V~38V
Converter Type:	Integral,
Protection Grade:	IP67/IP68
Explosion Proof:	Ex deibmb IIC T3~6
Velocity:	0.05~12m/s ( 0.1~15m/s as required )
Liner:	PU(DN25~DN500)/ F4(PTFE) (DN25~DN1600)/ F46(FEP) (DN10~DN200)/ PFA (DN10~30)
Flowing Direction:	Forward, Reverse
Electrode Material:	316L, Pt, Ta, Ti, HB, HC, WC
Electrode Number:	3~6 pcs
Flange Material:	SS/CS
Alarm (normal open):	Empty, excitation, upper/lower limit
Ambient:	Temperature: -30~+60°C, Humidity: <90%
Protocal:	RS-485/ Hart

Installation method:
1 meter diameter should be according to the diameter of the pipe installation, the installation location should avoid sunlight, water, ice and pollution, convenient for dismantling and credit card.
2 water meter should be installed (display) oriented.
3 should be taken before the new purge the lines of sandstone, hemp yarn and other sundry, lest cause water meter failure.
4 water meter as shown in the direction of arrow should be consistent with the piping in the direction of flow.
5 if a water meter installed on the boiler feed water end, to prevent the hot water boiler and steam flow and internal parts damaged water meter, the best in the installation at the water meter outlet check valve.

Conditions of use:
The water temperature: ling water meter is not higher than 40 °C (hot water meter is not higher than 90 °C) and do not arrive at 0 °C
Pressure: no more than 1 mpa
Maximum allowable error:
From including the minimum flow (qmin) to does not include the low area boundary flow (qt) plus or minus 5%
From including boundary flow (qt) to include overload flow (qs) of high area plus or minus 2%

Other models:

We are a professional manufacturer and exporter that engaged in the development, sales and customized service of

Pressure sensors,

Pressure transmitters,

Temperature sensors,

Temperature transmitters,

Electromagnetic Flow meters,

level measuring instruments,

Pressure gauges etc.

They are widely used in aerospace, automobile, chemical, metallurgy, petroleum, paper-making,drugs manufacturing, electric power, food, medicine, railroad and water conservation industry etc.

Any inquiry, contact us freely.