Scanner Consumable Part MagTek Check Scanner Cleaning Card
USD $0.01 - $0.2 /Piece
Min.Order:25 Pieces
Shenzhen Cleanmo Technology Co., Ltd.
Description
Product Name:MagTek Check Scanner Cleaning Card
ScanGuard Check Scanner/Check Reader/MICR Cleaning Cards
25 pieces Cleaning Cards per Box
This Presaturated Cleaning Card is design to clean successfully as it transports through the feed path cleaning
the Sensitive Magnetic Heads, Lens, and Transport Rollers. This card prevents processing delays and misreads
as it removes contaminants from check reader/scanner/MICR feed paths, rollers, and heads.
Larger Surface Cleaning Card with a Broader Width and Longer Length design allowed the Scanner to Clean
more Effectively and Efficiently.
Preventive Maintenance Cleaning Cards have been embraced by OEM’s to provide a Positive Cleaning
Performance and extending the Service life of the Check Scanner.
Recommended Usage: Once per day in high use areas and once per week in low use areas.
Usage Directions:
1) Remove Check Scanner Cleaning Card from pouch.
2) To clean the magnetic head and lens plates, insert cleaning card into hopper as you would insert a
standard check, then choose scan cycle and allow card to pass through the scanner. Reuse the card
by flipping it top to bottom and repeating the process several more times.
3) To clean the drive rollers, choose scan cycle while holding onto the trailing end of the card.
4) Dispose of card.
Check Scanner Cleaning Cards will clean:
Digital Check TellerScan - TS200, TS210, TS220 & CheXpress™ CX30 Check Scanner
Panini Check Scanner Vision X
MagTek Check Scanner
Canon CR-55 Check Scanner
Kodak i6090 Check Scanner
NCR TS 230-100 Check Scanner
Unisys Smart Source Pro Check Scanner
Epson CaptureOne 30 Check Scanner
Seac Banche RDS 3000 Check Scanner
Visionshape CS 470/480 Check Scanner
And many others!
Approved and Recommended for use by Major Equipment Manufacturers
Cleaning Kit includes :
Cleaning Swabs – Please refer to our Cleaning Swabs Product Broucher
Size
3 Sizes Configuration are available with Standard thickness of Tolerance : 0.012” +/- 0.003” or
(0.305 +/- 0.0762 in mm)
1) 4.375” X 8” X 0.018” or 111 X 203 (mm)
Part Number : CSCC- 437508
2) 2.5 x 6.0 (inches) or 63.5 x 152.4 (mm)
Part Number : CSCC- 2506
3) 4.0 x 6.0 (inches) or 101.6 x 152.4 (mm)
Part Number : CSCC- 0406
Reduces residue build-up without dismantling equipment
Quick, easy, inexpensive preventative maintenance