Specifications

Milk Liners For DeLaval Harmony Clusters
1.Material: synthetic rubber
2.Length: 295mm
3.Diameter of two ends: 22mm&14mm

Milk Liners For DeLaval Harmony Clusters

The main reason to switch to the Hybrid inflation is cow comfort! after a week of their use you will already notice many cows no longer hesitate entering the milking area!

 

After several weeks most farms start to notice a change for the better in the teat end condition, the action of the inflation is more of a surrounding pressure on the teat end as opposed to a crushing action created by the closing action of a typical round or even a typical triangular inflation.

 

The least important aspect to those who care about their cows and health is the fact the inflations will last a minimum of 6,000 ICM while many farms currently will change the inflations around 8,000 to 12,000 ICM. Those farms going the longer ICM will generally change just the milk tubes 1/2 way through the life cycle

 

 

 

The Hybrid® inflation comes as a set of 4 (ea) inflations complete with shells inflations vented nipples air and milk tubes. There are 2 different milk tubes available which are of different hardness depending on the style of claw you are using. The sets also come with either a 1/4" ID or a 9/32" ID air tube. Air vents are located in the plastic nipple between the shell and the milk tube for quickly evacuating the milk from the inflation to the claw.

 

Both jetter cups and manifold cups are available for in/place washing for most systems.

 

Pricing is important but performance and longevity (outstanding teat ends, good milking speed and 6,000 to 13,000 ICM's) should be foremost on the dairyman's mind!

 

 

1.Material: high quality synthetic rubber
2.Length: 35 cm
3.Diameter of two ends are 2.cm and 2cm
4. ISO9001 & CE  certificates Proved the quality

5. Over ten years experience gurantee the long time use without maintenance.

6. Feature: Our Milking liners are made of synthetic rubber. 

 

Model No.	Customer Part No.	Origial No.	Liner (mm)						Shell (mm)
			A	B	C	D	E	F	L	M	N
MLS001U	1U	960000-01	295	19.4	24	9	135	24.6	155	17	44
MLSK23	ORK23	Orionk23	296	25.6	20	11	128	23.3	145	21	45