Specifications

The 10/100Base-TX to 100Base-FX 3 ports Fast Ethernet Switch is fully compliant with all IEEE802.3u standards
AC-DC Power Adapt

3 ports Gigabit Ethernet Optical Fiber Switch

FCC Warning

 

The 10/100M 3 ports Ethernet Switch have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial environment. These devices can use, generate and radiate radio frequency energy and may cause harmful interface to radio communications unless installed in accordance with this User's Guide. Operation of this device in a residential area is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at his / her own expense.Checklist

1.    Checklist

 

Your Fiber Media Converter carton should contain the following items:

10/100M 3 ports Ethernet Switch

AC-DC Power Adapter

This User's Guide        

Please notify your sales representative

2.    Overview

 

The 10/100Base-TX to 100Base-FX 3 ports Fast Ethernet Switch is fully compliant with all IEEE802.3u standards.

* Multi-mode: SC/ST Fiber Connector

* Single-mode: SC/FC/ST Fiber Connector

*Single-mode Single Fiber: SC Fiber Connector

Six LEDs display instant status monitoring for Power, TX Fdx, TX 100, TX Link/Act, FX SD, FX Link/Act.

3.    Installation

Please follow the procedure outlined below:

Turn off the power of the device/station in the network in which the Media Converter will be installed.

Ensure that there is no activity in the network.

Attach fiber cable from the Converter to the fiber network. The fiber connections must be matched-- transmit socket to receive socket.

Attach a UTP cable from the 100Base-TX network to the RJ-45 port on the Converter.

Connect the power cord to the Converter and check that the Power LED lights up. The TP Link and FX Link LEDs will light when all the cable connections are satisfactory

Turn on the power of the device/station

 

 

4.    LED Description

 

 

LED	Colour	Function
FX 1 LNK	Green	Lit when FX 1 100Base-FX
FX 2 LNK	Green	Lit when FX 2 100Base-FX
PWR	Green	Lit when +5V Power is available.
TX FDX	Green	Lit when UTP Full Duplex Mode is enabled.Blinking when collision is present.

TX SPD	Green	Lit when UTP is 100M
TX LNK	Green	Lit when UTP cable connection with remote device is good.Blinks when any TX traffic is present.

  

5. Fiber Optic Information:

	MM-2KM	SM-25KM	SM-40KM
Fiber Type	Multi-mode	Single-mode	Single-mode
Wavelength	850/1310nm	1310nm	1310nm
Distance	2Km	25Km	40Km
Min TX PWR	-20.0dBm	-16.0dBm	-8.0dBm
Max TX PWR	-12.0dBm	-8.0dBm	-3.0dBm
Sensitivity	-31.0dBm	-32.0dBm	-33.0dBm
Link Budget	11.0dBm	15.0dBm	25.0dBm

 

Single Fiber Information

 

	WDM-20KM	WDM-40KM	WDM-60KM
Fiber Type	Single-mode	Single-mode	Single-mode
Wavelength	1310/ 1550nm	1310/ 1550nm	1310/ 1550nm
Distance	20Km	40Km	60Km
Min TXPWR	-13.0dBm	-8.0dBm	-3/-8.0dBm
MaxTX PWR	-4.0dBm	-3.0dBm	1/-2.0dBm
Sensitivity	-36.0dBm	-36.0dBm	-36.0dBm
Link Budget	23.0dBm	28.0dBm	33/28.0dBm

 

 

 

6. Technical Specifications

 The Converter conforms to the following standards:

Standards: IEEE802.3u Fast Ethernet

10/100Base-TX and 100Base-FX

Connectors (RJ45-UTP and Fiber SC or ST)

>Multi-mode: RJ-45 and SC/ST Connector

>Single-mode : RJ-45 and   SC Connector

LED: PWR, FX1 LNK, FX2 LNK, TX SPD,TX FDX,

     TX LNK

 

Data Transfer Mode   : 10/100Mbps

Duplex Mode     : Full or Half Duplex Mode

Power Requirement : AC 170-260v

                        DC 1A@+5V

Ambient Temperature: 0 ~70°C

Humidity           : 5% to 90%

Dimensions :External Power 26 x 71 x 93mm    (H x W x D)

Cable:

UTP: Cat. 5 UTP cable        

Fiber : Multimode: 50/125, 62.5/125, or

100/140um

Singlemode: 8.3/125, 8.7/125, 9/125, or10/125um

 

Note:

A. The Media Converter supports MDI/MDI-X auto crossover. This facilitates the use of either a straight connection CAT-5 cable or a crossover. CAT-5 cable.

   The auto-sense function will detect remote transmit and receive pairs,and correctiy assign the transmit and receive pairs from the Media Converter.

B. Fiber port is always set to full duplex mode.

C. UTP port is auto-negotiation mode.Auto-negotiation allows UTP link partners to select the best common mode of operation.

D. WDM Single Fiber Model

The Single Fiber converter is specially designed with an optic Wavelength Division Multiplexing(WDM) model that can transport bi-directional full duplex signal over a single fiber simultaneously.

   Single Fiber Model TX,RX Wavelength:

   The Converter-1(A) Single-Mode 20/40/60Km models are option TX(Transmit) 1310nm, RX (Receive) 1550nm.

   The Converter-2(B) Single-Mode 20/40/60Km models are option TX(Transmit) 1550nm, RX (Receive) 1310nm.