Product Details

1.Features

HD-TVI/CVI/AHD/CVBS balun 4 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

Single Channel HD Passive Video Balun

•Real-time transmission over UTP cat5e/6

•No power required

•Compatible with all HD-TVI, HD-CVI & AHD analog camera

•Color video max up to 440m(1443ft) for HD-CVI 720P analog camera Color video max up to 240m(787ft) for HD-CVI 1080P analog camera

• Color video max up to 230m(754ft) for HD-TVI 720P analog camera Color video max up to 250m(820ft) for HD-TVI 1080P analog camera

• Color video max up to 320m(1050ft) for AHD 720P analog camera Color video max up to 330m(1082ft) for AHD 960P analog camera •NTSC, PAL & SECAM video format compatible

•Male BNC with extended 5.9inch(150mm)mini-coax pigtail

•Two screw terminals connection for UTP cable

•Built-in TVS (Transient Voltage Suppressor)for surge protection

•Wave Filter Design, Anti-Static Design

•Lightning protection design Grade: III

•60 dB crosstalk and noise immunity

•Exceptional interference rejection

•ABS engineering plastic housing

2.Overview

HD-TVI/CVI/AHD/CVBS balun 4 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

The FS-HDP4103 video balun is a passive (non-amplified) device that allows the transmission of real-time CCTV HD video signal via cost-effective Unshielded Twisted Paired (UTP) cable. Baseband (composite) signals of any type are supported.

The FS-HDP4103 is compatible with all HD-TVI, HD-CVI and AHD analog camera.

The flexible mini-coax pigtail lead allows the FS-HDP4103 to fit neatly inside CCTV camera back boxes or dome camera enclosures and flexible connection with DVR. Screw terminals of the FS-HDP4103 allows easy connection of UTP cable output. Used in pairs, the FS-HDP4103 eliminates costly and bulky coaxial cable.

The superior interference rejection and low emissions of the FS-HDP4103T and FS-HDP4103R allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The FS-HDP4103 is built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.

3.Wire and Cable Recommendations

HD-TVI/CVI/AHD/CVBS balun 4 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

The FS-HDP4103 is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals

can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.

4.Technical Specifications

HD-TVI/CVI/AHD balun 3 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

Model			FS-HDP4103
Product Name			Single Channel HD Passive Video Balun
Applied Devices			CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video	Video Format		PAL, NTSC, SECAM
	Operating Frequency		DC to 42MHz
	Max Distance		HD-TVI 720P: 190m	HD-CVI 720P: 440m	AHD 720P: 320m
			HD-TVI 1080P: 190m	HD-CVI 1080P: 230m	AHD 960P: 330m
	Common-mode/Differential-mode rejection		15KHz to 42MHz 60 dB typ
	Impedance		Coax, Male BNC 75Ω unbalanced
			UTP, screw terminal 100Ω balanced
	Attenuation		1.5 dB typ Max
Wire Type	Network Wiring		One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
	Category Type		2 or better
	Impedance		100 ± 20 ohms
	DC Loop Resistance		52 ohms per 1,000ft (18 ohms per 100m)
	Differential Capacitance		19 pF/ft max (62 pF/m max)
Power		No external power required
Connector	Video input/output		Male BNC connector
	Video input/output		Screw terminal
Protection	Surge Protection		renewable solid state surge protection
	Video Input		2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
	Video Output		2KV(different mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Mechanical	Housing		ABS engineering plastic
	Body Color		Black
	Dimensions (LWH)		42.417.817.4mm (BNC connector & cable excluded)
	Net Weight		40g
Environmental	Operating Temperature		-20º ~ 70º C
	Relative Humidity		0~95% (non-condensing)
	Storage Temperature		-40º ~ 150º C

5. Applications

HD-TVI/CVI/AHD balun 3 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

• Security Monitoring System

• Multimedia Network Teaching System

• Medical Monitoring Display System

• Industrial Automation Control System

• Banking, securities, financial information display system

• Remote Network Server Monitoring

• Department Store Security

• Casino Security

• Hospitals, Airports and banks

• School Campuses

6.Application Diagram

HD-TVI/CVI/AHD balun 3 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

7.Company Information

HD-TVI/CVI/AHD balun 3 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

8.Exhibition

HD-TVI/CVI/AHD balun 3 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

9.Certification

HD-TVI/CVI/AHD balun 3 in 1 features, two screw terminals connection for UTP cable, DAHUA/HIKVISION/AHD Camera

Packaging & Shipping

Trade Shows