Name: Folksafe video balun 1channel BNC connector unique push pin
Brand: FOLKSAFE
Availability: InStock

Product Details

Product Description

Folksafe video balun 1channel BNC connector unique push pin Modle:FS-HDP4201

1-CH HD-CVI/TVI AHD UTP Passive Video Balun

Push pin terminal connection; too-less installation in less than 1 minute

Dimensions: 185*18.5*19mm (L*W*H BNC connector+ pigtail included)

Feature

Single channel HD video & power transmitter and receiver (12V/24V DC/AC)

Real-time transmitter over cat5e/6

Compatible with HD-CVI, HD-TVI, AHD & CVBS analog cameras

Color video up to 440m for HD-CVI 720P camera

If you adjust saturation of DVR, max up to 470m

Color video max up to 230m for HD-CVI 1080P camera

Color video max up to 190m for Hikvision TVI 720P camera

Color video max up to 190m for Hikvision TVI 1080P camera

Color video max up to 230m for TVT HD-TVI 720P camera

Color video max up to 230m for TVT HD-TVI 1080P camera

Color video max up to 320m for AHD 720P camera

Color video max up to 320m for AHD 960P camera

Color video max up to 250m for AHD 1080P camera

Built-in TVS for surge protection

Wave-filter Design, Anti-static Design

Lightning protection design Grade:III

60dB crosstalk ans noise immunity

Exceptional interference rejection

ABS engineering plastic housing

Picture

Overview

The FS-HDP4201 video balun is a passive (non-amplified) device that allows the transmission

of real-time CCTV HD video signal via cost-effective Unshielded Twisted Paired (UTP) cable.

Baseband (composite) signals of any type are supported.

The FS-HDP4201 is compatible with all HD-TVI, HD-CVI and AHD analog camera.

The FS-HDP4201 has a mini-coax pigtail lead which allows quick mounting onto fixed

cameras, allows in-camera mounting in most dome cameras and allows flexible connection

with DVR. Push-pin terminal block allows tool-less connection of UTP cable output. Used in

pairs,the FS-HDP4201 eliminates costly and bulky coaxial cable.

The superior interference rejection and low emissions of the FS-HDP4201 allow video signals

to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits.

This allows the use of a shared or existing cable plant. The FS-HDP4201 is built- in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.

Specification

Model		FS-HDP4201
Product Name		Single Channel HD Passive Video Balun
Applied Devices		CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video	Video Format	PAL, NTSC, SECAM
	Operating Frequency	DC to 42MHz
	Max Distance	HD-TVI 720P: 230m	HD-CVI 720P: 440m	AHD 720P: 320m
		HD-TVI 1080P: 250m	HD-CVI 1080P: 240m	AHD 960P: 330m
	Common-mode/Differential-mode rejection	15KHz to 42MHz 60 dB typ
	Impedance	Coax, Male BNC 75Ω unbalanced
		UTP, push-pin terminal block 100Ω balanced
	Attenuation	1.5 dB typ Max
Wire Type	Network Wiring	One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
	Category Type	2 or better
	Impedance	100 ± 20 ohms
	DC Loop Resistance	52 ohms per 1,000ft (18 ohms per 100m)
	Differential Capacitance	19 pF/ft max (62 pF/m max)
Power		No external power required
Connector	Video input/output	Male BNC connector
	Video input/output	Tool-less push-pin terminal block
Protection	Surge Protection	renewable solid state surge protection
	Video Input	2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
	Video Output	2KV(different mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Mechanical	Housing	ABS engineering plastic
	Body Color	Black
	Dimensions(LWH)	38.418.619.5mm (BNC connector & cable excluded)
	Net Weight	40g
Environmental	Operating Temperature	-20º ~ 70º C
	Relative Humidity	0~95% (non-condensing)
	Storage Temperature	-40º ~ 150º C