Specifications

 OFS-FAS-1 Series

10/100M Ethernet Fiber Media Converters

OFS-FAS-1 100M Fiber Media Converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX).

The traditional 10/100M Ethernet can be extended to the distance of 100km through optical fiber link. The performance and quality of the products are excellent because of adopting latest IC from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and diagnose the failure of converters. OFS-FAS-1 Converters could be used alone; Converter Standalone should be inserted to 14 slots RACK supplied by OFS. Crop. which is suitable for the use of Network Centre.

10/100M SFP Slots Media Converter(Without SFP Module) 

Main features

 Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex.

 UTP port supports MDI/MDI-X auto crossover.

 Indicator function of link fault (LFP): When optical fiber or UTP is at fault, the converter could stop all the link.

 Multiple Optical Transceiver could be chosen: SC, ST or FC, singlemode / multimode

 Supporting 1600 bytes packet for management 

 Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode.

 Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.

 Internal or External switching power: for users to choose.

Technical Specifications

 Operating standards:IEEE802.3u,10/100Base-TX and 100Base-FX;

 MAC addresses table: 1K

 Data buffer: Built-in 128Kbyte RAM .

Connectors: UTP Connector: RJ-45, 10/100Mbps;  Fiber Connector: ST/SC/FC, 100Mbps

Cable:

UTP: Cat. 5 (the max distance up to 100m)

Fiber ( Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)

Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)

Flow Control

Full Duplex: Supporting standard IEEE802.3x

Half Duplex: back pressure

LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.

Power Requirement: AC 170 ~ 240V, DC 5V.

Ambient Temperature: 0 ~ 70°C

Humidity: 5 ~ 90%

Dimensions: Internal power:  30×110×140mm

Fiber Information

Order Information