Product Details

Product Description

video signal wireless transmitter receiver, FS-4102SR

•Full-motion color video signal up to 1312ft(400m) and

monochrome (B&W) up to1968ft(600m) via UTP cat5e/6

•NTSC, PAL & SECAM video format compatible

•Real-time transmission

•No power required

•Two screw terminals for UTP cable

•Male BNC connector

•Exceptional interference rejection

•Built-in TVS(Transient Voltage Suppressors) for surge protection

•Lightning protection design Grade:Ⅲ

•50 dB crosstalk and noise immunity

•Compact size and easy installation

•ABS engineering plastic housing

overview

The FS-4102SR video balun is a passive (non-amplified) device that allows the transmission of real-time CCTV video signal via cost-effective Unshielded

Twisted Paired(UTP) cable. Baseband (composite) signals of any type are supported.

Male BNC of FS-4102SR allows connection directly to the camera or DVR. Screw terminals of FS-4102SR allows easy connection of UTP cable output.

Used in pairs, FS-4102SR eliminates costly and bulky coaxial cable, allowing live CCTV color video signal up to 1312ft(400m). FS-4102SR is also compatible

with all the other FOLKSAFE passive transceiver for application at distance up to 1312ft(400m) and active receiver up to 2296ft(700m)

The superial interference rejection and low emissions of the FS-4102SR allow video signals to coexist in the same wire bundle as telephone, datacom,

or low-voltage power circuits. This allows the use of a shared or existing cable plant. With Built-in TVS(Transient Voltage Suppressors) for surge protection,

damaging voltage spike problems are eliminated.

Specification

Product Name			Single Channel Passive Video Transceiver ( FS-4102SR )
Applied devices			CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video	Video Format		PAL, NTSC, SECAM
	Operating Frequency		DC to 5MHz
	Max Distance		UTP Category 5e (24AWG) Color: 1312ft(400m) B&W: 1968ft(600m)
	Common-mode/Differential-mode rejection		15 KHz to 5 MHz 60 dB typ
	Impedance		Coax, Male BNC 75Ω unbalanced UTP, Screw terminal 100Ω balanced
	Attenuation		1.5 dB typ Max
Wire Type	Network Wiring		One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
	Category Type		2 or better
	Impedance		100 ± 20 ohms
	DC Loop Resistance		52 ohms per 1,000ft (18 ohms per 100m)
	Differential Capacitance		19 pF/ft max (62 pF/m max)
Power		No external power required
Connector	Video input/output		Male BNC connector
	Video input/output		Screw terminal
Protection	Surge Protection		renewable solid state surge protection
	Video Input		2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
	Video Output		2KV(different mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Mechanical	Housing		ABS engineering plastic
	Body Color		Black
	Dimensions(LWH)		42.417.817.4mm (BNC connector excluded)
	Net Weight		20g
Environmental	Operating Temperature		-20º ~ 70º C
	Relative Humidity		0~95% (non-condensing)
	Storage Temperature		-40º ~ 150º C

Application Diagram