Product Details

ASTM IEC ISO Standard Salt Spray Fog Chamber Manufacturer in China

1. Product Overview:

This product series can simulate the marine climate and can be uses to test the salt fog resistant performance of materials, products and their coatings. They can also be used to evaluate the quality of the coatings.

Performance:

* Perform Salt Spray Corrosion Testing

* Small Size & Medium Size & Large Size

* Comply with Internaitonal standards as ASTM, IEC, ISO, DIN, MIL, JIS

2. Technical Parameters:

Model	S-150	S-250	S-750	S-010	S-016	S-020
Internal dimensions (mm)	450600400	600900500	7501100500	8501300600	8501600600	9002000600
Overall dimensions (mm)	80010801080	87014001150	115017501400	125020001550	125023001550	130027001550
Technical structure
Temperature range	Ambient ~60℃
Humidity range	95% ~ 98% RH
Temperature fluctuations	+/- 0.5 ℃
Temperature deviation:	+/- 2.0 ℃
Test time	1~999 hours, settable
Spray deposition	1~2ml / 80cm2 · h
Spray type	Continuous / Periodic
Temperature Controller	LED display, P.I.D+S.S.R. microcomputer integrated controller
	5.7" programmable color display touch screen controller (option)
Temperature sensor	Platinum resistance. PT100ohm / MV A-class
Salt fog collected	With standard funnel and metering cylinder
salt water filtration	With water filter near the suctiontubes( Avoid the nozzle blockage)
Salt water preheating	The temperature for salt water should be equal with workroom temperature
Spraying system	Tower spray and nozzle without crystallization(Fog is more fine and uniform distribution)
Interior /Exterior material	Glass fiber reinforced plastics; (corrosion resistance, Anti-aging, high strength)
Standard configuration	round bar / 1 piece; sample holder / 1 piece; spray nozzle / 2 pieces; Fog collectors / 2 pieces; metering cylinder / 2 pieces
safety device	Humidifier dry-combustion protection, independent over-temperature protection, water shortage protection, over-current protection, refrigerant high-pressure protection switch, over-current circuit breaker, earth leakage protection and so on.
Sealing	Hydrostatic hood seal
Standard	ISO 3768/3769/3770, DIN50021-75, ASTM B-117, JIS H8502, IEC 68-2-11,IEC68-2-52, MIL-STD-750, ISO 9227
Nominal Power	2500W	3500W	4500W	6500W	8500W		11000W
Power Supply	AC220V 50HZ	AC220V 50HZ	AC220V 50HZ	AC380V 50HZ	AC380V 50HZ		AC380V 50HZ

3. Design & Construction:

Fog Chamber Fog chamber is made from Glass fiber reinforced plastics, Material is corrosion resistance, Anti-aging, high strength. Hydrostatic seal Cover Test specimen bracket / holder
Atomizer Tower and Spray Nozzle Corrosion resistance atomizer tower. Quartz spray nozzles No crystallization of atomizer tower spray and nozzle. Collectors in fog chamber
Spraying Spray deposition: 1~2ml / 80cm2 · h Spray type: Continuous / Periodic Fog is more fine and uniform distribution Perform a variety of salt corrosion test
Control Panel LED display, P.I.D+S.S.R. microcomputer integrated controller Control workroom temperature and saturation temperature. Programmable color touch display controller (option)
Safety Protection Independent over-temperature protection, Water shortage protection Over-current protection Earth leakage protection and so on Power Supply and Wiring 380V+/- 10%, 50 Hz Three-phase-five-wire system