KMC BOP 10-35 WPCE equipment wire line pressure control equipment
Specifications
10-35 WPCE equipment wire line pressure control equipment :
Wellhead Wireline Pressure Control Equipment is used for testing and paraffin treatment in flowing oil well, gas well, water injection well and coalbed methane testing. The unit supplies buffer and transitional area for string running with pressure to hole, could satisfy the wellhead seal requirement and there is no overflow. Simple operating, safe and reliable function. Working pressure is 10MPa, 21MPa, 35MPa, 70MPa and 105MPa. Standard ID is 30mm, 52mm, 62mm(65mm), 76mm(78mm), 89mm, 102mm(103mm), 120mm, 140mm, 160mm and 180mm. Our factory has the ability to design products to adapt to different environment according to clients ' requirements.
The whole Wellhead Wireline Pressure Control Equipment is composed of Grease Injection Control Head, Top Catcher, Lubricator, Bottom Catcher (include testing blowout assly), BOP, Pump-in Tee, Up sheave, Down sheave, Crossover Flange, Quick testing Assly, all kinds of pipes and other components which necessary.
Features and Benefits:
1.Grease Injection Control Head is operated by remote hydraulic manual pump, which could seal wellhead in time and promise safety of operation. A lube oil cup mounted on top of Grease Injection Control Head, which is as lubricator for downing cable and assistant for setting tools in well.
2.Top and Bottom Catcher is double safe feature, in order to prevent string tools dropping in well. Top Catcher is by hydraulic remote control, Bottom Catcher has manual operation system if hydraulic system is fault. There is pressure testing blowout sub, which for checking wellhead pressure, releasing left pressure in Lubricator and pressure self-check.
3.Lubricator supplies buffer and transitional area for string tools, which connected by many Union Lubricators. Single Lubricator is 0.8—3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
4.BOP could be separated by Single, Dual, Triple and Quad Ram. Hydraulic or Manual control.
5.There is antifreeze& unfreeze and pressure self-check system.
7.Up& Down sheave is selected of Aluminium alloy, and has the function of preventing cable jump.
9.According to different service conditions, our factory supply HP/HT Wellhead Wireline Pressure Control Unit with H2S&Acid services.
THE Diverter
The main functions of the Diverter
Diverter system iss a key component of offshore drilling mostly, and it always services the surface layer driling before BOP. The diverter assembly is the uppermost component of the riser system.It is not used to shut or seal the well completely, but to either direct the returning drill fluid or control the blowout and surface laye gas.When encountering the gas, the diverter can close off around drillepipe or casing, and open the special diection vent line on board at the same time.With the platform manifold, the gas will be guided and choked at special point.
Diverter system must be equipped with hydraylic control system to use. With the different size of packers, it is able to seal various shapes and sizes of driling tools including kelly, drill pipes, tool joints, drill collar,etc.
21 1/4″-2000psi Annular BOP Bore: 21-1/4”
Working pressure: 2,000psi (14Mpa)
Top connection: 21-1/4”-2000psi 6BX R73 SST Studded
Bottom connection: 21- 1/4”-2000psi 6BX R73 SST Flanged
Weight: 7769
Dimension: 1488×1488×1395
Technical Parameter
Bore 30"
Working pressure 500psi
Volume for Closing 245L
Volume for Opening ----------
control pressure 1200-1500psi
Manufacture specification API SPEC 16A
Dimenison 2070x2070x1749
Weight 10978kg
Top connection MSS 30"class300 R95 CRA Studded
Bottom connection MSS 30" class300 R95 CRA Flanged
We supply Chinese made Cameron Type U ram BOP, Shaffer type annualar BOP and ram BOP. Bore size: 7-1/16", 9", 11", 13-5/8", etc. working pressure: 3000psi, 5000psi, 10000psi and 15000psi. All consumable spare parts are interchangeable with Cameron or Shaffer OEM parts