Specifications

Spiral Wound Gasket
1.UL,FDA,ROSH or REACH approved
2.Good handling,Good recovery rate
3.Size:1/2"~100"

Flange Spiral Wound Gasket Made In China  

  

kind of gasket 

1.A. spiral wound gasket consists of four types:basic type,with  inner ring,with outer ring,and with inner and outer rings.

  B. heat exchanger spiral wound gasket :basic type and with inner and outer rings

2.Normally material used:

A. Steel tape :08F ocr13,ocr18Ni9Ti.1Cr18Ni9Ti(321).ocr17Ni12,M02(316),and 0Cr17Ni14M02(316L)

B.(Cold roll)steel plate for inner and outer ring:

Outer ring "mild  steel ,ocr13 and OCr18Ni9

Inner ring: same as steel ,special order is available through negotiation.

C.Normetal tape: flexible graphite, special made asbestos ,Teflon and non-asbestos paper.

 

Scope of Application 

1.Working  temperature:-196~700(Not  higher than 600   in oxidic  medium)

2.Working  pressure:<=25MPa

3.Gasket  coefficient’s=2.5~4

4.Min.pre-tightening   specific   pressure’s=68MPa

  

Welcome to contact me if you have any questions.

Thanks!