220V single phase AC servo driver for 100watt,200watt servo motor with position,speed,torque control
USD $2.00 - $2.00 /Set
Min.Order:1 Set
ADTECH (Shenzhen) Technology Co., Ltd.
Feature Of Driver
Paramenter Of Driver
Input Voltage | AC220V -15%~+10% |
Driver Current | 10A |
Matching Motor | <=400 Low-inertia Motor |
Using Temperatre | Working:45C Storage:-40C~55C |
Relative Humidity | 40%~80% No Condensing |
Atmosphere | 86~106kpa |
Control Mode | 1.Position Control 2.Speed Control 3.Torque Control 5.Inside Pules Control 6.Electric Tool Carrier Control |
Pulse Command | 1.Pulse+Direction 2.CW+CCW Pulse 3.Two-Phase AB Orthogonal Pulse |
Control Precision | 0.01% |
Response Frequency | <=200Hz |
Pulse Frquency | <=500kHz |
Speed Ratio | 1:5000 |
Regenerative Brake | Internally Installed |
Electronic Gear | 1/30000~30000/1 |
Overload Capacity | <=300% |
Feedback Pulse | 2500P/R |
Protection Function | Over Current, Over Voltage, Overload, Over Heat, Lack Phase, Over Speed, Encoder Abnormal, Out Of Tolerance, Mode Abnormal Alarm |
Slection Table
Performance Paramenters | Servo motor NO. | ACN04005D | ACN04020D | 06020DC | 06040DC | 06060DC |
Matching Servo Driver NO. | QS7AA010M | |||||
Flang Specification(mm) | 40 | 60 | ||||
Rate Power(kw) | 0.05 | 0.1 | 0.2 | 0.4 | 0.6 | |
Rate Torque(Nm) | 0.16 | 0.32 | 0.637 | 1.27 | 1.91 | |
Max.Torque(Nm) | 0.48 | 0.95 | 1.911 | 3.8 | 5.73 | |
Rate Current(A) | 0.65 | 1.2 | 1.5 | 2.8 | 3.5 | |
Rate Speed(rpm) | 3000 | |||||
Rate Voltage(V) | 220 | |||||
Installation Size | Rotor Inertia(kgm²/10^-4) | 0.0232 | 0.0422 | 0.17 | 0.302 | 0.44 |
Shaft Diameter(mm) | 8 | 8 | 14 | 14 | 14 | |
Body Length(mm) | 72.8 | 90.8 | 102 | 122 | 144 | |
Weight(kg) | 0.4 | 0.55 | 1.11 | 1.33 | 1.78 |