Product Details

315A repair MMA/TIG/MIG/Pulse MIG welder

Specifications:

Model No.	315A	350A	400A	500A	630A
Rated Input Voltage(V)	3-Phase, DC, 380V±15%, 50/60HZ
Current Range (A)	10A-315A	10A-350A	10A-400A	10A-500A	10A-630A
Thickness(mm)	0mm-25mm
Wire Feed Speed(m/min)	1m/min-24m/min
Arc length(%)	-50%-50%
Arc Force	-50-50
Material type	13 kinds
Wire Diameter	0.8, 1.0, 1.2, 1.6
Operation mode	2T, 4T, S2T, S4T, Spot, JOB
Start current(HotI,%)	0%-200%
End Current (EndI,%)	0%-200%
Start time (Hott,s)	0.1s-15s
End Current Time (Endt,s)	0.1s-15s
Burning time (Burn,%)	0%-20%

Features:

(1). DSP Control

(2). Inverter

(3). Synergic Adjustment

(4). Ampere: 315A, 350A, 400A, 500A, 630A

(5). VRD function

(6). Welding Material: Carbon Steel, Stainless Steel

(7). Compensation function to voltage fluctuation, with strong voltage fluctuation resistant ability

(8). Protective circuit of over-heat, over-current and over-voltage

(9). Multi-function: MMA, TIG, Pulse TIG, Spot TIG, MIG, Pulse MIG, Double-pulse MIG

(10). Suitable for all kinds of welding position

(11). Air Cooled & Water Cooled for choice.

(12). Current, Voltage Adjust can be adjusted and show on both wire feeder and welding machine

(13). Available to set the parameters of start current, welding current and arc force separately

(14). It could pre-set the current, wire feed rate, thickness, wire diameter and voltage and inductance, the LCD displays the welding current and voltage

(15). It is the first one to use the DEVICENET inside the welding machine, it could connect to robot and special system, easy to achieve automatical welding

(16). The parameters could be set, such as inching wire feed speed, soft start speed, gas pre-flow and gas post-flow, burn time, start current and end current and etc

(17). With great network function, it’s able to realize the centralized monitoring and control, software upgrade and remote diagnosis

(18). It could continuously record the welding date, time, setting, welding current and voltage, arc breaking, short circuit, alarm and etc, convenient to record and control the quality

(19). It has 2T, 4T, Spot welding, special system modes

(20). Full digital waveform control, steady performance, good consistency, it does not affect by temperature, humidity, and the component deterioration

(21). With 100 sets of storage memory

(22). Gas Heat Function

(23). Arc Strike Method for TIG: HF / Contact Arc Strike

(24). Compensation function to voltage fluctuation, with strong voltage fluctuation resistant ability

(25). It supports the low voltage function, saving energy, also avoiding the shock hurt, which meets the European safe standard

(26). With the welding expert system inside, it has the different expert curve for rutil flux-cored wire, basic flux-cored wire, Cellulose electrode, which makes the welding perfectly

(27). It can adjust striking current and time, not only not to melt through the thin sheet, but also guarantee the quality of the arc strike joint

(28). It has the Arc adjustment function, not only suitable for discontinuous welding, but also for continuous welding

(29). It can reduce the effect of a “sticking” rod electrode (MMA welding)

(30). The wire feeder adopt the digital encoder and dual drive, it has the function of speed feedback to ensure the stability of wire feed speed. The parameters could be set, such as inching wire feed speed, soft start speed, gas pre-flow and gas post-flow, burn-back time, start current and end current and etc

(31). Brand: Forever Star

(32). After-Service: 3-year warranty

Standard Accessories:

(1). Power Source: 1PC

(2). Wire feeder: 1set(Remote Control)

(3). Air cooled MIG welding gun: 1PC(3m cable)

(4). Comprehensive Cable: 5m: 1PC

(5). Electrode Holder: 1PC

(6). Earth Clamp: 1PC

(7). Cable:

315A/350A/400A: 3m*35mm2: 2PCS

500A/630A: 3m*50mm2: 2PCS