Waterproof Screen Protector for iPhone/PAD
Negotiable /Piece
Min.Order:500 Pieces
Shenzhen Vtek Technology Co., Ltd.
Waterproof Screen Protector for iPhone/PAD
Specifications:
Total Thickness | Use layer thickness | Transparency Rate | Block the Ultraviolet Rate | Block the Infrared Rate | Hardness | Abrasion resistance | |
High Clear | 0.23 | 0.12 | 98% | 17% | 8% | 4H | 50 |
Anti-Glare | 0.22 | 0.11 | 92% | 20% | 11% | 4H | 60 |
Fingerprint Proof | 0.22 | 0.12 | 95% | 25% | 15% | 4H | 50 |
Diamond | 0.253 | 0.12 | 97% | 14% | 10% | 3H | 40 |
Mirror | 0.38 | 0.29 | 68% | 100% | 17% | 3H | 40 |
Privacy filter | 0.48 | 0.44 | 60% | 73% | 44% | 4H | 50 |
Explanation | |||||||
High Clear | 17% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Anti-Glare | 20% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Fingerprint Proof | Fingerprint proof, 25% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Diamond | Flash Diamond surface, 14% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Mirror | 100% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Privacy filter | 73% UV Protection: Reduces eye strain caused by the LCD screen. Brightness will be reduced by 35 percent. |
Screen Protector Features:
1. Shield and Protect your LCD Monitor screen from scratches;
2. Materials are manufactured in Japan;
3. Ultrathin and Durable, comes in Clear or Anti-Glare;
4. Anti-Scratch, Anti-Dust and waterproof;
5. Non-adhesive back side, will not leave residue;
6. Quickly and easily adhere directly to the screen;
7. Can be easily removed and cleaned with water and used repeatedly;
8. Custom designed to fit your LCD Monitor Screen;
9. Three layers design, keep middle applied layer clean and easy to be applied;
10. No harm to operation of the device after application.
Installation Methods:
Step 1 Check Film Size
Clean both hands and LCD screen and adjust the location where the film would be on the LCD procedure (Please arrange the film to the center of LCD before you take off all vinyl out of the hard film )
Step 2 Clean LCD
Clean the LCD with cleaner and micro fiber cloth included. If there is a dust left on the LCD, that will cause a bubble. Apply cleaner on the cloth, not on LCD.
Step3 Film Installation
Take off 1/3 of back PET and begin to apply it on the area you desire on LCD. Take off the rest of back PET as your fully attach the film. Result may vary upon installation.
Step4 Remove bubble with a Squeeze
Remove bubbles by using squeeze included with the film, If you see bubbles after installation, lift up with film with a tape and re-attach it or slide the bubble to the sides very slowly and carefully with a squeeze.
Note:
Please do not perform installation in a dusty environment.
Please read installation steps from the two tabs on the front and back protector layers before performing installation.
Protect your cell phone's LCD screen against dust, scratches and eliminate glare.
Designed for perfect fit with the LCD screen
Offers tough, durable, transparent surface while keeping the LCD screen clean and unscratched
See more products below